How to distinguish whether the pesticide has deteriorated? Today, Xiaobian combines several common pesticide preparations, specifically to share with you how to distinguish whether the pesticide has deteriorated, I hope to help you.
First, wettable powder. Take 1 part of wettable powder, add 200 parts of water, hold in a glass cup, shake it for a certain period of time, observe the suspension. If the drug precipitates slowly, the suspension is good.
In case of poor quality, silicone additives or 0.10% neutral detergent should be added before use to increase wet spread. If the wettable powder absorbs moisture and is hard, it should not be used as a spray.
Second, the powder. If the powder absorbs moisture and agglomerates during storage, it needs to be placed in a cool and ventilated place to dry. Do not use it after sun exposure or crushing. If the agglomeration is serious, it can only be used for toxic soil.
Third, emulsifiable concentrate. In the process of storage of emulsion pesticides, if they are not properly stored, the following three conditions may occur.
1, agglomeration phenomenon. If the emulsified concentrate has a non-flowing viscous liquid or has formed a soapy solid, it proves that the solvent has been mostly volatilized and the quality has changed and cannot be used.
2. Precipitation crystallization. For long-term storage of the emulsion, there will be white crystals on the bottom of the bottle or turbidity. If the emulsified milk bottle is immersed in warm water of 30-40 ° C, the crystallization will melt in about 30 minutes and return to a transparent liquid, indicating that the quality is still good and can be used. If it does not dissolve, it indicates that the quality of the cream has changed and cannot be used.
3. Changes in the emulsifying properties of the emulsifiable concentrate. Take 1 part of emulsifiable concentrate, add 200 parts of water, put it in a glass cup, shake it and let it stand for about half an hour. Observe the emulsification. If there is no oil slick in the upper layer, there is no precipitation in the lower layer, no obvious oil beads in the middle, indicating that the emulsification performance is good; There is emulsifiable concentrate, there is sediment underneath, and there is delamination after 10 minutes, indicating that the emulsion is destroyed and cannot be used.
More pesticide information, please pay attention to pesticide information network
1.Application : For printer and copier machine
2.Dimension: Customized dimension, OEM & ODM
3.Material: A6063, A6061, A3003 and other series alu alloy
4.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
5.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
Straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING:Wooden case/carton
7. Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Drawn Tube For Printer And Copier
Drawn Tube For Copier,Drawn Tube For Printer,Aluminum Cold Drawn Tube,Aluminium Cold Drawn Tube
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com