What is the reason for the lack of fire in the gas stoves in the home? The reporter found that many problems with gas stoves were related to improper cleaning. During the use of the consumer, it is best to carry out regular cleaning according to the instructions for use.
Self-inspection
Many consumers have encountered this situation: gas stoves can not be fired, or need to fire several times to succeed. What is the reason for this? The staff of the National Gas Appliance Quality Supervision and Inspection Center said that if this happens, there may be several reasons: the cooking coil and the hole of the stove ring may be moved during cooking. If there is no correspondence, you can check and adjust it so that the spark just hits the edge of the hole closest to it; you can also adjust the damper below the gas stove. When the damper is too large, the mixing ratio of gas to air is too small, and it is not easy to catch fire. You can turn the damper down first; it may be that the stove is too dirty to block the gas, you can scrub it clean and see if the fire is smooth; check if the battery has electricity.
As for some consumers, gas stoves often have yellow fires. It is likely that insufficient air intake causes insufficient combustion of natural gas, and the damper can be adjusted. If it is caused by changes in air pressure, don't worry, it will naturally recover after a while. Of course, if the quality of the gas in the pipeline is not high, yellow fire will also occur.
Experts recommend that consumers regularly clean and clean the gas stove according to the instructions for use. Clean the soup and oil traces that are spilled during cooking, and pay attention to the cleaning of oil and carbon deposits at the location of the fire hole to avoid affecting the fire.
Wipe the cooker without damaging the appliance
There are also some precautions during the cleaning process. A brand stove cooker told the Jinghua Times reporter that there is a solenoid valve under the cooker switch. Under normal circumstances, there is a rubber pad, and the seal is very strict. However, after a long time of use, aging or damage may occur, and the sealing performance is not as good as before. When cleaning the cooker, consumers must take care not to let water flow into the hole under the switch. Otherwise, the solenoid valve will be damaged, the probability of malfunction of the cooker will be increased, and the service life of the cooker will be greatly reduced.
The editorial department of the journal also received help some time ago. When cleaning a cooker, in order to remove the oil stain on the stove, a fire was used. When the stove head deformation could not be installed, he chose to use a hammer. The stove was given a few times and it was hard to install. After inspection by professionals, a large number of crack paths were found in the contact part of the stove head and the combustion plate, which was caused by the expansion after the fire. Experts said that the stove head is generally made of aluminum alloy or steel. It can't withstand high temperature. Once it is deformed, it will cause tempering and damage the internal structure of the gas stove, eventually leading to gas leakage.
Professionals said that when cleaning the stove, the fire hole on the fire cover can be cleaned with a toothpick. If a crucible appears, wipe it with a dry towel. If there is oil on the stove, use a steel ball and a rag to clean it. Generally, it is not necessary to take it down for cleaning. (Cheng Jianlan)
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " We don't lack the deposit, just for each other's security! ", want to communicate with peers to join Jiuzheng Building Materials Network Cabinet exchange group]
Baoji zhipu non-ferrous metal processing co., LTD. Main processing single crystal furnace, vacuum furnace, sapphire, furnace, such as molybdenum, tungsten, tantalum, niobium, tungsten bars, Tungsten Plate tungsten, tungsten bars, Tungsten Tube , foil, tungsten, tungsten hook, foil, molybdenum rods, tungsten, molybdenum bars, molybdenum rod, professional custom-made all kinds of accessories, tungsten molybdenum tantalum niobium thermal field Tungsten Boat , tungsten, tungsten seed crystal chuck, Tungsten Seed Crystal Clip, tantalum, tungsten, tantalum cathode plate temperature instruments, pressure sensing device Tantalum Diaphragm, diaphragm and other parts processing, domestic use most the high grade raw material, equipped with advanced equipment and professional production team, can be customized according to requirements of various materials of Tungsten Products, welcome to inquire, looking forward to your cooperation!
Screws And Blolts,Hex Screws And Bolts,Alloys Hex Screws And Bolts,Tungsten Screw Nuts Bolts
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com