When many people carry out home renovations, they all turn balconies into public areas, especially small-sized balconies. Not only are they satisfied with drying clothes, but tatami are a large number of small-sized balconies. How should a small apartment balcony be renovated? Next Xiaobian introduced the tatami balcony.
Decoration balcony tatami effect chart one
Raise the balcony structure on the layout, make a table that can be raised and lowered, rise to read the Internet, lay flat on the quilt and use it as a bed, and bring a rough bookcase with a blue arch. The window and the mottled balcony on the countertop make reading a pleasure.
Decoration balcony tatami effect chart two
The balcony area is large, so it transforms into a gathering place for leisure. The paving of large strips of wood and the embellishment of green plants also give a fresh and natural atmosphere.
Decoration balcony tatami effect chart three
The balcony is closed and squeezes out extra space. Ingenuity replaced the chair with the floor, you can lie down. There are several cartoon dolls on the walls and tatami mats that look very cute.
Decoration balcony tatami effect figure four
This bedroom balcony tatami decoration is mainly refreshing colors, white-based gauze plus soft wool pad on the floor, not only looks warm but also a certain petty bourgeoisie mood. I believe such a bedroom balcony tatami design is very much like many young friends, especially girls.
Decoration balcony tatami effect chart five
The sunshine is good and the balcony area is also large. Mr. Zhang loves reading, and her daughter likes to enjoy the sun. So it has played a role in this. Put a small table to drink tea, look at the book is very pleasant. You can raise some flowers next to it. It feels like it's back to nature and people are relaxed.
Editing summary: About the renovation of the balcony tatami is introduced here, I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
Balcony tatami decoration renderings
Chopped Graphite/Graphite Electrode in different materials have different definition of graphite pieces, some data and literature is not very big graphite particles are called graphite pieces (such as Graphite Powder) some is graphite products have a certain size, for Graphite Broken into patches, we here say of graphite for a second, usually called graphite blocks. Graphite is produced from graphitization and machining process of graphite products. It is used as additive and conductive material in the manufacture of graphite waste in steel and foundry industries, and can also be processed according to customer's requirements. They are also widely used in electric arc furnaces (steelmaking) and electrochemical furnaces (metallurgical and chemical industries).
Main use of graphite
Graphite pieces due to its low ash content, conductive and heat conduction performance is good, so there are a wide range of USES, can be added to the formula of less ash or dust products, graphite broken broken into small particles commonly use. Ingredients to add a certain amount of graphite, the plastic paste after kneading, especially during extrusion can reduce the friction resistance paste to squeeze the mouthpiece, to improve the coefficient of pressure type. Graphite pieces of coal adsorption properties of asphalt is better, to join the carbon block can rise to reduce the "short" waste (i.e., the product after roasting top produce honeycomb structure), and can improve the thermal conductivity of the carbon block and alkali corrosion resistance. The electrode paste used in hermetically-sealed thermal furnace is added to a certain amount of graphite to increase the conductivity and thermal conductivity of the electrode paste and accelerate the sintering speed of electrode paste. When the graphite is ground into small particles or fine powder, it is also used as raw material for the production of graphite chemical equipment (such as graphite-resin tubes). The graphite can also be used as a carbon addition agent for the electric furnace.
Graphite classification
1. Raw and broken. It is a raw blank that is not qualified after molding.
2. Roasting is the cutting debris that is recovered after the roasting of raw billet and after inspection of unqualified waste and the processing of calcined products.
3. The graphite is broken, and it is inspected by the graphite-producing waste and the cutting debris produced by graphite products in the process of processing.
Graphite Broken
Graphite Broken,Broken Graphite Electrode,Graphitized Anode Broken,Graphite Tablets
Fengcheng Ruixing Carbon Products Co., Ltd , http://www.lnfcrxts.com