1, color wheel damage
The rotation speed of the color wheel is quite high, about 7200 rpm. If the dust protection is not good, dust accumulation will gradually adhere to the wheel, causing unbalanced rotation of the wheel, which is similar to the general principle of body vibration caused when the wheels of a car are not balanced. The color wheel will hurt the motor by vibration, and it may also cause the color wheel to decrease in speed or instability, causing a malfunction.
2. Decrease in brightness
When the environment is seriously dusty, the brightness may be reduced by more than 40% within half an hour. Generally, the reflectance of a new reflective lens has a specification of 98% or more, and the lens has a permeability law specification of more than 97%. These requirements are high to obtain high values. The efficiency of the output brightness, when dust protection is not good, the dust accumulates on the surface of the optical components, reflectance and transmittance will decrease with time, resulting in decreased brightness.
3, the decline in contrast
The definition of contrast is that the maximum brightness value output by a large-screen display unit is divided by the darkest brightness value. When the scene is dark, dust on the optical components reflects stray light, and the light that should not be projected from the lens is projected. , increase the brightness of the dark part. The same part of the light in the bright part will be blocked by the dust, reducing the amount of reflection and transmission of light, and lowering the brightness value of the bright part. This will naturally decrease the contrast.
4, sharpness decreases, the image becomes blurred
The reason for the decrease in sharpness is the change in the refractive index of the optical component. When the surface area of ​​the lens or lens is dusty, that is, there is an irregular material with an irregular refractive index on the surface of the lens, resulting in a change in the path of the light, the focus is not in the same focal point, and the imaging becomes blurred.
The Clinker Exterior Tile surface is unglazed, the front and the opposite are the same in color and material. The surface of the Clinker Wall Tile is slightly rough. This special appearance gives the Clinker Porcelain Brick a retro style, and it will have an elegant and simple feeling when used outdoors.
Small Exterior Wall Tile size: 45x95mm, 45x195mm, 60x240mm, 60x108mm, 52x230mm, 140x280mm...
According to the tile surface shape, it is divided into plane, corrugated surface, split brick surface, stone surface, etc.
Advantage of Small Exterior Tile
1. The rough surface of the clinker tile is very soft under the illumination of the light, it is not glare, and it will not cause light pollution to the surrounding environment. Split exterior tile are often used in some retro-style finishes, architectural exteriors or creative designs.
2. The small size exterior tile has very good wear resistance and anti-slip property. The particles on the surface are very fine, so the water absorption rate of the clinker wall tile is very low, and the anti-permeability and moisture resistance are very strong.
3. It has the characteristics of easy cleaning, good weather resistance, low maintenance cost and a long service life.
Construction attention
1. In order to prevent emptying and falling off, the base layer of the wall must be cleaned and splashed with water.
2. The clinker tile and the base body must be firmly adhered, free of hollow drums, no skew, cracks and other defects. The joints are densely packed, straight, wide and narrow, uniform in color, and the pattern is butted.
3. Pay attention to the joints and clean the surface after the joint material has hardened.
Clinker Exterior Tile
Clinker Porcelain Brick,Clinker Wall Tile,Clinker Exterior Tile,Small Exterior Wall Tile,Small Exterior Tile,Split Exterior Tile
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com