[China Aluminum Network] Because there are many impurities in the molten aluminum in the electrolytic cell, it must be filtered before casting the aluminum ingot.
It is reported that commonly used methods include: The front, the solvent purification method is to use the solvent added to the solution, the solvent has a small density, high activity, strong adsorption capacity and so on. By adsorbing oxides in the solution, new droplets form to the surface. Scum formed after cooling. Aluminum ingots can be cast to remove scum. second. Gas purification, commonly used chlorine gas, nitrogen gas or chlorine-nitrogen mixed gas, is a major primary aluminum purification method. (1) Chlorine gas purification. Chlorine is introduced into the liquid aluminum to generate many fine bubbles, which are fully mixed in the aluminum liquid, and the dissolved hydrogen therein, as well as some mechanical inclusions, can be adsorbed on the small air bubbles. As the bubbles rise to the surface of the aluminum liquid, they are discharged. (2) Nitrogen purification method. Because chlorine is toxic and expensive, nitrogen purification occurs. Alumina balls (418 mm) were used as the filter media. N2 directly into the liquid aluminum. The molten aluminum is continuously fed into the purifier, passes through the alumina ball filter, and is flushed with nitrogen. The non-metallic inclusions and dissolved hydrogen in the molten aluminum are then removed and continuously discharged, so that the fine nitrogen bubbles are evenly distributed. In the treatment of aluminum liquid play a role in purification. (3) Mixed gas purification method. A mixture of chlorine and nitrogen is used to purify the aluminum liquid. Its role is to remove hydrogen and separate oxides on the one hand, and to remove certain metal impurities (such as magnesium) on aluminum. The commonly used composition is 90% nitrogen + 10% chlorine. . There are also 10% chlorine + 10% carbon dioxide + 80% nitrogen. This works better. Carbon dioxide can spread chlorine and nitrogen well, reducing operating time. Enterprises should choose the appropriate purification method based on actual needs.
Ningbo RMI Plastic Co.,Ltd offer PTFE and rubber gaskets for flange face sealing, according to standard DIN PN10, DIN PN16, ANSI CL150, ANSI CL300. JIS 10K. Size from 1/2" to 24". Rubber Gasket have material EPDM, natural rubber, NBR and silicon rubber. we have PTFE Gasket and rubber lined PTFE gasket and rubber gasket.
Ningbo RMI Plastic Co.,Ltd offer gaskets with specification:
Size:DN15~DN400 (1/2 inch ~ 16 inch)
Connection: Flange FF DIN PN10, JIS10K, RF ANSI CL150, CL300
Material: EPDM;FKM;PTFE;EPDM LINED PTFE
Gasket
Rubber Gasket,Valve Gasket,Flange Gasket,Sealing Gasket
Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com