The installation of vehicle monitoring system mainly includes four parts: vehicle video terminal, camera and pickup installation, cable laying and wiring.
1. Car video terminal installation:
Car video terminals must be fixed firmly when installed.
In order to prolong the life of the equipment, please install the equipment as far as possible on the vehicle where the vibration is weak, such as behind the driver's seat or the front of the vehicle. Note that the installation position cannot affect the normal operation of the driver.
The equipment should be installed in the ventilated area of ​​the vehicle: The equipment installed on the plane should maintain a certain distance from other objects in order to facilitate the circulation of air and heat dissipation; it can not be installed in a closed space (such as the vehicle tool box). Does not affect the heat dissipation of the device.
The external wiring of the equipment must have sufficient spacing and protection to ensure that the wire is not bent or leaks due to vibration and wear;
Make sure the equipment is far away from the heat source on the vehicle.
Horizontal installation of equipment, any other angle of installation will damage the equipment.
When selecting the installation location, consider the size of the space the hard disk cartridge is pulled out.
2. Camera, pickup installation <br> <br> camera, microphone installation is determined according to the customer's monitoring focus.
Camera installation location selection principle:
Covering the Scenes to be Monitored The camera is easy to install, the wiring of the fixed camera is convenient, the camera is not easy to be blocked, and the damage is taken into consideration.
3. laying of the cable wiring <br> <br> vehicle monitoring system is very important, wiring is standard reliability and stability will be directly related to the operation of the system, pay attention to the following pre-construction:
Cables should be wrapped in the protective hose. The installation cable should be consistent with the direction of the original car cable, install the wiring along the original trunk of the vehicle,
The original vehicle cable is tied and fixed so that the wiring is neat and hidden to prevent the driver and the passenger from breaking.
Host power cord: The host power cord should be pulled directly to the vehicle battery and must not pass any switch.
1. Car video terminal installation:
Car video terminals must be fixed firmly when installed.
In order to prolong the life of the equipment, please install the equipment as far as possible on the vehicle where the vibration is weak, such as behind the driver's seat or the front of the vehicle. Note that the installation position cannot affect the normal operation of the driver.
The equipment should be installed in the ventilated area of ​​the vehicle: The equipment installed on the plane should maintain a certain distance from other objects in order to facilitate the circulation of air and heat dissipation; it can not be installed in a closed space (such as the vehicle tool box). Does not affect the heat dissipation of the device.
The external wiring of the equipment must have sufficient spacing and protection to ensure that the wire is not bent or leaks due to vibration and wear;
Make sure the equipment is far away from the heat source on the vehicle.
Horizontal installation of equipment, any other angle of installation will damage the equipment.
When selecting the installation location, consider the size of the space the hard disk cartridge is pulled out.
2. Camera, pickup installation <br> <br> camera, microphone installation is determined according to the customer's monitoring focus.
Camera installation location selection principle:
Covering the Scenes to be Monitored The camera is easy to install, the wiring of the fixed camera is convenient, the camera is not easy to be blocked, and the damage is taken into consideration.
3. laying of the cable wiring <br> <br> vehicle monitoring system is very important, wiring is standard reliability and stability will be directly related to the operation of the system, pay attention to the following pre-construction:
Cables should be wrapped in the protective hose. The installation cable should be consistent with the direction of the original car cable, install the wiring along the original trunk of the vehicle,
The original vehicle cable is tied and fixed so that the wiring is neat and hidden to prevent the driver and the passenger from breaking.
Host power cord: The host power cord should be pulled directly to the vehicle battery and must not pass any switch.
Floating Sphere,Brass Solid Sphere,Cpvc Solid Sphere,Stainless Steel Solid Sphere
Antong Valve Co.,Ltd , https://www.atvalveball.com