Marble is a kind of natural and environmental-friendly decoration material. Its bright colors and luxurious style make it very important to refurbish its marble . Marble maintenance renovation includes: stone waxing, stone crystal surface hardening, stone renovation, stone waterproofing, marble tacking, stone disease treatment, so that the stone forms a layer of strong crystal protective film to achieve the highest brightness and effectively extend the use of stone life. Use special powerful decontamination pastes and stain removers to remove stains and restore the stone to its true color.
Marble curing renovation
First, the stone crystal surface treatment, so that the stone forms a layer of strong crystal protective film, to achieve the highest brightness, and effectively extend the life of the stone.
(A) marble crystal surface treatment
1. Tools: Multi-functional scrubbers, vacuum cleaners, red scrubber pads, white polishing pads.
2, Pharmacy: K2, K3 crystal water and stone maintenance agent, neutral detergent.
Steps: Use a multi-functional scrubber with a red scouring pad to sprinkle marble crystal water on the ground and apply the same amount of water. Start turning and rubbing. The brush machine should be thrown horizontally, about 10-15 times back and forth. The greater the mechanical torque in the process, the better. Put a small amount of "stone maintenance agent" on the natural fiber mat to re-polish once. The purpose of this process is to increase the hardness of the crystal surface, and the entire maintenance project has been completed. The entire marble surface is also smooth as new, with a gloss of 90 degrees.
4. Matters needing attention: Do daily cleaning work according to different needs every day, regular dust removal to keep the stone surface clean. Do not polish with a black wax pad. Wash with red, white pad cleaning, avoid scrubbing brush, due to the irregular pressure and hardness of the brush is easy to wear the ground, the general dust can dust cleaning maintenance.
(b) Granite crystal surface treatment system
1, tools: multi-functional cleaning machine, stainless steel silk mat, suction vacuum cleaner.
2. Pharmacy: Stone hard powder and stone maintenance agent.
3. Steps: Mix equal hard powder powder and stone maintenance agent on the ground. Use stainless steel silk cotton pad and mechanical pad to grind the mixture to dryness. Each time, the hard processing range should not be too large, with no more than 2 square meters. The best, often check whether the stainless steel silk mat is full of mixture, timely replacement, and finally clean. Replace the clean stainless steel silk mat with a small amount of jet hardener and grind it again. This completes the maintenance process. The treated stone has a gloss of 80 degrees or more.
4. Matters needing attention: Do daily cleaning work according to different needs every day, regular dust removal to keep the stone surface clean. Do not polish with a black wax pad. Remember to clean the tool after each work, so that the next time you use it, pay special attention to the pad and stainless steel silk mats, which need to be kept clean to ensure normal performance.
Second, stone renovation
(a) The equipment used:
Stone refurbished machines, multi-functional washing machines, vacuum suction machine, counterweight, diamond grinding, 3M polishing pads, buckets, dials and other special tools.
(b) The used medicaments:
Stone cleaning agent, stone brightener, stone bright powder, K2, K3 brightening hardener and other stone special agents.
(3) Procedures:
First use a multi-functional floor cleaning machine and stone cleaning agent to clean the ground. Use a stone retreading machine to match the hardness of the diamond grinding discs on the ground to begin grinding, first grinding with a 50# grinding disc, then use 100, 150, followed by 300, 500, 800 polished, to a certain extent after the stone is polished with more than 1000 pieces of grinding and then continue to polish until the stone surface to achieve a delicate, smooth degree, and then use K2, K3 for hardening, brightening.
Finish with a wool pad.
(4) Effect:
The refurbished, crystal surface treated stone surface without impurities, brightness reaches 90 degrees, the hardness increased significantly 2-3 Mohs hardness.
Third, stone waterproof
Use water repellent to prevent water stains, stains, oil stains and colored stains from infiltrating the stone and causing lesions.
Fourth, stone repair
The use of caulking agent, the gap between the stones filled with the same color, so that the stone to achieve one-piece effect, increase the appearance of the stone.
Fifth, stone disease treatment
The main lesions were lesions caused by water stains, oil stains, wine stains, coffee stains and other colored stains penetrating the stone, and special strong decontamination creams and stain removers were used to remove the stains and restore the true color of the stone.
Use a special strong decontamination paste, stain remover to remove stains to restore the color of the stone
Editor's summary: The above is a description of the steps involved in the renovation and maintenance of marble and related knowledge. I hope to help friends who have this need! For more information, please continue to pay attention to our website, follow-up will show more exciting content.
Marble door marble kitchen cabinet bathroom marble decoration design window marble marble
Photoluminescent Paint,Photoluminescent Pigment,Photoluminescent Powder,Glow In The Dark Powder
JINAN REALGLOW CO.,LTD , https://www.realglowsign.com