Jinan Shengquan: will add graphene to products such as grinding wheels

Abstract In August of this year, Jinan Municipal People's Government and Jinan Shengquan Group Company issued a news report: We first applied graphene to current products, such as phenolic resin, light core steel, brake pads, grinding wheels, sandpaper, etc. These products will greatly enhance performance and become more competitive in the market. ...

In August this year, Jinan Municipal People's Government and Jinan Shengquan Group Company released the news that we first applied graphene to current products, such as phenolic resin, light core steel, brake pads, grinding wheels, sandpaper, etc. These products will greatly enhance performance and become more competitive in the market. It is also pointed out that when graphite is diluted into phenolic resin, the impact strength can be increased by 150% after curing, the bending strength is increased by 40%, and it is non-toxic and has a small gas release amount, and is suitable for use in high-end interiors such as automobiles, high-speed rails, ships, and airplanes. On the material. It is also said that the application of graphene in automobile brake pads can improve the friction coefficient and the amount of wear and tear, and can be used on tires to increase tire strength and extend life. It is used in the low-loading industry of automobile vehicles to make it have good heat dissipation and Ultra-strong conductivity ensures the timely release of static charge and improves application quality.

Precision Steel Tube are produced by Cold Drawn and Cold Rolling, with very good OD and ID tolerance and smoothness ,

with very good Concentricity, Good Roundess, Less Deviation, suitable for machinery.

Cold Drawn Seamless tubing (also known as CDS steel tube. Cold Drawn Seamless tubes offer tight tolerances compared to Hot Finished Seamless tube, and offers stronger physical properties compared to other mechanical tubing.

CDW Steel Tubes is made by drawing the ERW tubes from the tube mills through a plug and die combination, mounted on the draw bench. The end tagged and annealed tubes are drawn through a closely machined die that controls the outside diameter of the tubes. At the same time the tube passes over a plug that controls the inside diameter. Further, the manufactured tubes are processed by the downstream facilities for different industry applications.

Technical Standard according to:

ASTM A513, ASTM A519,

DIN2391, EN10305-1, EN10305-4,

SAE J 524, SAE J525 etc.

Steel Grade:

SAE 1010, SAE 1020, SAE 1026, SAE 4130, SAE 4140.

ST35.8, ST37.0, ST52, E235, E355, 42CrMo4,etc

Sizes:

OD: 4.0 to 350mm

WT: 0.5 to 50mm

Length: Cutting Length available, max 12000mm according to Customer PO.

Precision Steel Tubes Seamless Precision Steel Tubes