| Home>Bearing knowledge> Common terms and definitions of roll bearing brackets |
Common terms and definitions for roll bearing brackets
Source: Bearing network time: 2013-04-04
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
A roll bearing consisting of one or two wave-shaped annular parts.
2. Stick to the pocket (window) hole cage pocket
Persist the hole or opening in the rack; to accommodate one or more tumblers.
3. Stick to the beam bare bar
Persist on a part of the shelf; used to separate the adjacent shelf pockets.
4. Stick to the claws of the cage prong
A cantilever that protrudes from a shelf or a semi-stick frame.
5. Stick to the pillar load plug
Usually a cylindrical strut; can be used through the axial bore of the roller.
6. Flange-guided land riding cage
A support frame that is radially guided (centered) by the shoulder surface of the bearing ring or bearing washer.
Recommend to friends comments close window
| Bearing related knowledge |
| The damage condition of the bearing and the reason for the high-speed "fine linear bearing" device. The reason for the overheating of the motor bearing and the disposal method The function and application of TIMKEN imported bearings |
This article links to http://
Please indicate China Bearing Network http://
Previous:The calibration of SKF bearing alignment function Next: Bearing pre-code (prefix) & post-code (suffix) meaning
Shenzhen Hongfa Automatic Door Co., Ltd. , http://www.hongfadoor.com