Stealing: The hidden works are the most injured
In the construction of the line, to bury the dark line, it is necessary to first groove the wall and the ground, and then penetrate the PVC pipe, but a few workers often perform barbaric construction for the sake of convenience, and do not choose different methods and directions according to the wall and location. It is easy to cause cracks in the wall, damage to the load-bearing wall and other hidden dangers. Dragon hair decoration designer Sun Qiang told reporters: "The housing wall is not allowed to slot the wall, and the wall with insulation after the slot, it is easy to cause cracking in the surface, in the ground slot, but also Be careful not to damage the floor, so be sure to pay attention during construction.→ Related reading: How to distinguish the merits of latex paint
Second, in the home improvement construction, almost all wires are put in PVC pipes and then buried in the walls. However, if the construction staff is not serious when threading, so that a plurality of wires in the tube winding and knotting, it is very easy to cause the local heat of the wire is too high, causing security risks. Sun Qiang suggested that it is best to supervise the worker's operation on site or by a professional supervisor. After the installation is complete, a power-on test should be performed and carefully check whether there is a partial heating phenomenon. At the same time, after the completion of the construction, a detailed wiring diagram should be left, so that if problems are found, it is easy to investigate and repair the problem.
Once again, it is necessary to prevent workers from using the sewers as garbage paths, and to dump some unused wastes such as small stones, cement, etc., which is likely to cause jams or unfavorable conditions in the future. A large-scale decoration company designer said: "At present, many professional decoration companies require workers to protect the sewers before construction to prevent debris from falling."
In addition to covert projects, items such as the paving of floor tiles, the leveling of the floor prior to the construction of wooden floors, and the putty sanding of paints on the walls before latex paint are relatively easy problems.
Reduction: latex paint is the biggest goal
In order to reduce costs, reducing materials is also one of the tricks used by poor construction workers. Yang Lifeng, general manager of Yuen Chau decoration, said: “For general engineering, the most likely handy facility is latex paint. According to the conventional construction process requirements, it requires a combination of both ends, but many lazy workers may have less brushes. The prevention is very simple, because the general auxiliary materials are provided by the company, so we chose the yellow putty, as long as the number is not enough will appear the bottom of the phenomenon. We also specifically equipped with their own material inventory to prevent workers from stealing Materials → Related Reading: Classification and selection of latex paint
Will there be any problems on the wood board during the renovation? Yang Lifeng said, “Generally large brand companies will use per-item quotas, ie raw materials, labor costs, etc., so as to effectively avoid material waste.†A senior industry insider who asked not to be named told reporters: “A lot of guerrillas will appear to be in the same quarter, that is, when they are constructing in the same community, they must indicate in advance that they can buy some materials. If you use a house that buys materials, then you tell the owner that the materials are not enough, so that you can collect multiple material fees; even if there is no string of goods, the guerrillas are likely to quietly sell some materials and earn black money.â€
To avoid the situation of the construction team cutting materials, choosing packages is also a good method. Many decoration companies will launch home improvement packages that include not only the auxiliary materials but also the main materials. The owner can only calculate the price in square meters, and the final quality of the construction. Enjoy two years of quality assurance under the constraints of the contract, so it is also a practical method for the owner to arbitrage.
Before retreading, all items in the house should be removed to ensure that the house is clean and dusty when painted. The floor generally requires brush primer and two coats of paint. If the surface of the polished floor is flawed, it is necessary to brush the primer several times depending on the situation. Once the paint is completely dry, it can be brushed again. Therefore, the renovation of the floor usually takes 4 days.
Partial refurbishment is not good
The overall refurbishment of the floor of a room is better. It can basically achieve the effect of a new floor, but the partial renovation will result in the difference between the floor and the floor. The longer the service life of the floor, the more obvious the difference between the old and the new.
Damaged, mildewed and deformed floors may not be refurbished. Floor mildew generally goes deep inside the floor. The surface of the polished floor is still subject to moldy spots; floor deformation and damage cannot be remedied by sanding. If only a small part of the floor is damaged, mildewed, and deformed, it can be replaced with a floor of the same color. If there is no floor with the same color, you can choose a floor with similar colors and color and distress it to minimize the chromatic aberration. If most of the floors have been damaged or have become mildewed or deformed, it is recommended to purchase them again.
Hidden Engineering Paint Lacquer Paint Decorative Decoration Company Decoration Design Floor Tile Tile Plastic Tile Category Floor Tile Tiles Price
Ordinary mullite porcelain is made of aluminosilicate natural minerals as a main raw material, and is formed by a reaction sintering method in which a eucalyptus is synthesized in a sintering process or a mullite is first synthesized and then sintered. Due to the low purity of raw materials and high impurity content, in addition to Al2O3 and SiO2, the components also contain impurities such as TiO2, Fe2O3, CaO, MgO, Na2O, K2O, etc., so that there are a considerable amount of glass phase in the product, resulting in mechanical and thermal properties. Poor, the excellent performance of mullite ceramics at high temperatures cannot be fully utilized. Therefore, ordinary mullite ceramics in the industry can only be used as a general refractory material in the case where the temperature and high temperature strength are not high.
Mullite Ceramic,Mullite Ceramic Plate,Mullite Honeycomb Ceramic,Mullite Cordierite Honeycomb Ceramic
SHENZHEN HARD PRECISION CERAMIC CO.,LTD , http://www.hardcm.com