According to the connection of the tank and the base, the toilet can be divided into two types: conjoined and split. According to the difference of drainage system, it can be divided into flush type and siphon type. According to the drainage method, toilets can be divided into horizontal (wall row) and bottom row (lower row).
Regardless of which one you choose, the following tips can help you choose a satisfying toilet.
1. Touch the surface of the toilet gently with your hands, if there is no uneven feeling, and feel that the glaze and the body are very delicate, which indicates that the quality of the toilet is better. If it is a mid-to-low toilet, the surface of the glazed and green body will be rough, dark in color, will find a small hole in the light irradiation.
2. The high-grade toilet is high in firing temperature, and it meets the requirement of all-ceramics, so there will be a heavy feeling in the hands. The low-grade toilet bowl has a low firing temperature and a short time, so it has not reached the all-ceramic requirement.
3. The water absorption rate of a high temperature-fired toilet is very low, so it is not easy to suck in sewage and produce odors. Some mid-to-low toilets have a high water absorption rate. When the sewage is sucked in, it is easy to smell bad and it is difficult to clean. After a long time, cracks and water leakage will occur. In the selection, you can gently tap the toilet with your hand. If the sound of the tapping is husky, not clear and loud, then such a toilet is likely to have internal cracks, or the product is not cooked.
4. At the time of selection, you must reach into the dirt of the toilet and touch the interior to see if it is smooth. If the handle is rough, it indicates that there is no glazed inside, and the toilet is easy to leak. The seal of the toilet seat should be made of rubber or foamed plastic. Such a seal has strong elasticity and good sealing performance.
5. Whether the design of the pipeline is scientific and rational has a great influence on the flush effect of the toilet. Under normal circumstances, try flushing before buying a toilet. In the norm, in the case of less than or equal to six liters of water, three flushes and an average of at least five flushed ping pong balls are required for the toilet.
When choosing a toilet, in addition to paying attention to the quality of the toilet, you may also be concerned about such issues as clogging, splashing, flushing, water saving, and mute.
First of all, we must first understand that for the toilet, there are two main types in the market: straight flush toilets represented by European brands, and siphonic toilets based on Taiwan, US and Japan brands. The flush-type toilet tank is narrow and small, with large excrement openings, steep slopes, and small diameter of the discharge pipe, while the siphon-type toilet tank is large, the toilet itself is larger, the excrement opening is smaller, and the drainage pipe is presented. The "S" camber uses siphon drainage.
Understand the general characteristics of these two kinds of toilets, then the question is, which one is better? Based on our concerns, let's make a comparison:
1 , blocking can not block
The pipeline area determines whether it is easy to block. There are no return bends in the design of a flush-type toilet, and the water flows straight. It is not likely to cause blockage during flushing. The siphon-type pipe diameter is also about 56 cm, which is equivalent to three times that of the straight flush type, so it is very easy to block it when flushing.
2 , can not splash
According to the results of the researchers' experiments, when the height of the toilet is greater than 200mm , splash water is serious, and when the height of the toilet is less than 140mm , water is rarely splashed, and the critical height is 160mm . The height of the toilet seat is determined by the difference between the height of the toilet seat and the height of the water seal (the height of the water column in the toilet), so the level of the water seal is directly related to the splashing problem. The standard water seal height specified by the government is 50mm, and the generally better product water seal height is 55-60mm.
3, flush dry is not clean
Straight flush toilet flush pipe is simple, the path is short, the diameter is coarse, generally 90-100 cm, easy to wash down larger objects; siphon-type toilet is a high pipe walkway, thin and long pipe diameter, because the pipe diameter The finer the siphon effect is, the more obvious it is, but if you want to clean it, you need 8-9 liters of water at a time, otherwise it is not easy to clean.
4, the festival does not save water
Whether the toilet is water-saving depends on the tank, and the second one is to see the bucket. Among them, the difference between a flush bucket and a siphonic toilet is the difference between the bucket and the flush-type toilet has a steep slope inside, and the water consumption is less than that of a siphonic toilet. In terms of water tanks, there is currently a relatively water-saving 3 litre/6 litre double-button water tank, with 3 liters of urine flushed and 6 liters of flushed stool, which saves much more water than an old toilet.
5, noisy noisy
When the flush toilet is flushed, the sound of "squeaking" sounds louder and louder. When the siphonic type toilet flushes, the noise is not so great. After the flush, you will hear the sound of "open, open, pass...".
The above is a small trick for Xiaobian to choose a toilet. After reading this, have you raised your posture? If you have other related tips, don’t forget to share it with you!
Ware purchase decoration materials knowledge bathroom decoration toilet
Fire Hydrant Hose,Rubber Hose,Faucet Extension Hose,Corrugated Rubber Hose
Fire Extinguisher Accessories,Emergency Light & Exit Light Co., Ltd. , http://www.nbfireextinguisher.com