Editor's note:
Many homes are popular for installing floor heating, but many people only know how to stay at a shallow level of floor heating. How much do you know about so many functional, laying and other professional questions?
1. "Can I only suspend the laying method?"
Due to the special structure of the geothermal heating system, the concrete floor cannot be nailed when paving the floor. Therefore, most of the pavements of geothermal flooring have long been recognized as suspension laying methods. In fact, with the continuous advancement of technology, there are two other methods of laying: floor bonding and keel laying. Recently, there has been a kind of fast-opening keel. This keel is paved without nails. The keel can be directly fixed on the concrete floor with glue, and then the keel is fastened to fix the floor on the keel. This not only increases the feel of the floor, but also allows space to convect the air up and down due to the space between the keels, which is conducive to the circulation of heat, and makes the floor more evenly heated, with less deformation and higher thermal efficiency. This is the recommended method of laying the current value.
2. “Is the name of the dedicated geothermal floor right?â€
In the current floor circulation market, the floor for floor heating is not only a wide variety, but also the name is more chaotic: such as "heat-resistant floor", "resistance to geothermal floor", "ground heat-resistant floor", etc., the most called "heating floor" “Ground heating floorâ€, “heat-resistant floorâ€, “geothermal floorâ€, “dedicated floor heating floorâ€, etc., we think that some names are unscientific, and some names do not seem to be appropriate. At present, especially the ground radiant heating system is in the early stage of development, the name must be Standardization, it should be said: "floor heating floor" should be defined as: suitable for the ground floor radiant heating system laying wooden floor, and through the board to the room to transfer heat.
3. "The thicker the floor, the more insulation?"
The thickness of the wooden floor is a factor that determines whether the foot feels comfortable, so many consumers are required to purchase the floor, especially when purchasing solid wood, multi-layer solid wood flooring or bamboo flooring. The thickness is 15-18mm. Therefore, in the purchase When they warm the floor, they also use this method to pick. However, it is not known that wood is a poor conductor. Usually, the thermal conductivity of wood material is between 0.17 and 0.34, and the water is 0.5. If the thickness of the floor is too thick, it is even more unfavorable for heat to pass. The floor is conducted to the surface of the board and is consumed in the conduction process. As for the heat preservation, the temperature difference between the upper and lower floors is very large, which will inevitably lead to a large deformation of the floor. "The thermal expansion and contraction" and "swelling and shrinking" will cause the floor to be scooped, twisted, bent and cracked, and the dimensional stability cannot be guaranteed (the geothermal floor A suitable thickness is 8-12 mm).
4. “Is the geothermal heating floor specification too wide?â€
Now consumers buy solid wood flooring for the comfort of life, and second, to show their identity. Therefore, when purchasing, it is often necessary to select those with larger specifications, especially in the width direction, and some can reach 180mm. Such width, in the daily floor covering, experts do not recommend users to buy, so as to avoid swelling due to the floor. Dry shrinkage appears to be separated from the seam, not to mention the fact that in the case of heating the floor, the surface is more likely to appear due to the faster water emission. Therefore, experts recommend that consumers should not buy oversized floors when purchasing geothermal heating floors.
5. “Is the floor mat with aluminum film dedicated to floor heating?â€
This is the most typical misleading. Practice has long proved that in the ground-radiation heating system, the heat transfer is mainly radiation, followed by convection, and finally conduction. If the aluminum foil is covered on the heat-dissipating ground, the anti-radiation is formed, and the surface temperature is the same while maintaining the floor heating temperature. Under the foam pad with aluminum film, the thermal resistance is large, while the ordinary foam pad has small thermal resistance. Obviously, the ordinary foam pad has better heat conduction effect than the foam pad with aluminum film, and is more favorable for heat conduction from the floor to the living room. Therefore, when purchasing a floor heating, the user should choose a common foam pad or a material layer with a small heat resistance, moisture resistance and corrosion resistance.
6. “Can I add plywood or blockboard under the floor?â€
First of all, the laying of plywood or blockboard under the geothermal heating floor is not conducive to the conduction of heat, which in turn causes the heat to increase in the conduction process, increasing the heating cost of the geothermal heating system. Secondly, if the quality of the purchased plates is not enough, it will lead to excessive formaldehyde content in the room, or because the moisture content is not up to standard, the moisture will be absorbed by the floor after laying, which will cause the floor to change and arch, and This substrate board has many disadvantages, and it can be said that it is self-defeating, and it is even more difficult to add a snake!
Suzhou Newstar Hardware Co.,Ltd is a professional Hand Tool bag manufacture located in Jiangsu Province China, including tool duffel bag, mechanic tools bag, Tool Bag set, etc. We could offer customers different kinds of tools bags with customized needs, such as material, size, type, pockets, handles, small inner pockets, name card, logo, etc. And also we are specialized in tools which could be put in tool bag, different combinations of Hand Tools, power tools and Garden Tools.
Hand Tool Bag,Tool Duffel Bag,Mechanic Tool Bag,Tool Bag Set
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.newstarhardware.com