RY100-65-200 thermal oil pump leak prevention and control methods

RY100-65-200 heat transfer oil pump adopts self-heating cooling structure to change the traditional water cooling structure, which makes the structure simple, small in size and economical in operation, good in function and reliable in use. It is developed on the basis of digestion and absorption of foreign oil pumps in our country The second generation of products, the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the central vertical upward, and the same motor mounted on the base. RY100-65-200 thermal oil pump seal leak prevention and control methods: 1. Gland installation is not accurate, plugging the front cover and drain cover on the back cover 2. Outer diameter of the seal with the seal seat hole with loose. 3. Reverse the direction of installation of the pump body, so that the pressure port connected to the unloading ditch, the formation of pressure to seal out. 4. Oil quality is not clean, the oil is not smooth. 5. Pipe thread with less stringent. As a high temperature pump an important component, plays a fixed spindle, seal the role of media, such as panic leaks, first check the seal selection and installation is accurate, and secondly check the condition is running smoothly.