ã€China Aluminum Network】Aluminum buckle board is a new type of decorative material that has emerged in recent years. It has a light weight, water resistance, no dust, corrosion resistance, easy scrubbing, easy installation, strong three-dimensional sense, soft colors and elegant appearance. Features, welcomed by users. Aluminum gussets are particularly suitable for ceiling decoration in kitchens and bathrooms. However, the pinch plate and its associated frame are pressed and formed by a metal sheet or plastic. The connection form of the aluminum pinch plate is a plug-in type. In order to ensure that the connection is not loose, the size of the connection structure should be relatively accurate, allowing adjustment. Smaller range, higher installation requirements. If the flat roof structure is not flat or the structure is deformed or the aluminum buckle plate is deformed, hard insertion or the like during the installation may cause flatness and unevenness of the aluminum buckle plate. In order to avoid the uneven appearance of the aluminum buckle plate flat top, attention should be paid to the following points in the decoration construction process: (1) The purchased aluminum buckle plate and its associated frame and accessories shall meet the product quality requirements and must not be bent and deformed. (2) During the transportation and stacking process, the aluminum pinch plate should be laid flat and cannot be pressed, and high temperature and harmful substances should be avoided. (3) The installation of the frame is smooth and the spacing deviation should be controlled within the allowable range. (4) When installing the aluminum buckle plate, if there is deviation in size, it shall be adjusted in advance and then inserted in order. It shall not be hard-inserted to prevent deformation (5) Large lamps, exhaust fans, etc. Shelving on the flat top of the aluminum gusset, it is necessary to reinforce the installation of the luminaire. As long as you can pay attention to the above five points, you can basically achieve the decorative effect of the aluminum buckle plate flat top, and avoid unevenness. During the construction process, if necessary, observation and inspection may be conducted by means of a ruler, hand test, and the like.
