Plastic-steel doors and windows are entering the millions of households with an elegant attitude. How to maintain the finished products' finished doors and windows is more worth our attention.
First, one of the advantages of steel doors and windows is basically do not need to repair, but considering that there are many improper use of steel doors and windows profiles or poor processing quality, it is recommended that the user is best to repair and maintenance once every six months to a year, generally should check the following five aspects :
1. Whether there is any crack in the profile weld of the door window frame or the fan.
2. Whether the door or window fan has obvious deformation, warping, or sagging fan.
3, check the sealing strips, thongs shrink, deformation, there are gaps.
4, whether the hardware accessories cracked, damaged, tight.
5, whether the drainage hole is open.
Second, when the door and window installation workers complete the installation of windows and doors, due to the carelessness of the wall decoration personnel, often appear uneven thickness of the filling foaming agent or adhesive coating in plastic doors and windows, and sometimes stubborn stains are also present. At this point, we can:
1. Use a spatula to level out the convex part of the filling and sand it to make it flat.
2. If there is paint decoration, the same color paint can be used to handle the leveling.
3, use water to scrub the surface of the profile to remove general dust.
4, stained with white cotton stained with ethyl acetate stubborn stains, and then scrubbed with water.
Doors and windows three trees paint window paint decoration
Previous Do you know how to choose the right electric door lock?
Next How to buy plastic steel doors and windows
Plastic-steel doors and windows are entering the millions of households with an elegant attitude. How to maintain the finished products' finished doors and windows is more worth our attention.
After the doors and windows are installed, due to the carelessness of the installers, the thickness of the filled foaming agent is often uneven or sticky on the steel doors and windows. Sometimes stubborn marks are also present. We can clean this way:
I think the plastic window hardware accessories are easy to damage, there is loose, loose off and so on.
The quality of profile of a plastic door and window should observe the appearance of the profile. The color should be blue and white instead of the white that people usually think. Pay attention to whether the color of the frame and the fan profile of the door and window are consistent, whether the appearance is uniform and whether the cavity distribution is reasonable. In the formulation of steel door and window profiles, calcium carbonate is usually added as the filler material, and some manufacturers reduce the cost. If the amount is too much, it becomes a calcified plastic. The surface of the doors and windows made of this plastic lacks luster. .
First, the quality of steel doors and windows profile should observe the appearance of the profile, the color should be blue and white, rather than the white people usually think, pay attention to the composition of the doors and windows of the box and fan profile color is the same, the appearance is uniform, cavity distribution is reasonable . In the formulation of steel door and window profiles, calcium carbonate is usually added as filler material, and some manufacturers reduce the cost. If too much is added, it becomes a calcified plastic. The surface of the doors and windows made of this plastic lacks luster. There is...
submit
Strain Gauges,Accuracy Load Cell,Parallel Grid Strain Gauge,Pressure Sensor Use Gauges
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com