We all know that the inverter adjusts the voltage and frequency of the output power supply by the internal IGBT breaking, and supplies the required power supply voltage according to the actual needs of the three-phase asynchronous motor, thereby achieving the purpose of energy saving and speed regulation. What are the ways and measures for the inverter to protect the motor? Let Dalan Motor Xiaobian take everyone to see it!
1. Overvoltage protection The output of the inverter has a voltage detection function. The inverter can automatically adjust the output voltage so that the motor does not withstand overvoltage and the motor runs within the set voltage range.
2. Undervoltage protection When the voltage of the motor is lower than 90% of the normal voltage (some settings are 85%), the inverter protection stops.
3. Overcurrent protection When the current of the motor exceeds 150%/3 seconds of the rated value, or 200%/10 microseconds of the rated current, the inverter protects the motor by stopping.
4. The phase loss protection monitors the output voltage. When the output is out of phase, the inverter will alarm and the inverter will stop immediately to protect the motor.
5, anti-phase protection Inverter can be set so that the motor can only rotate in one direction, can not set the direction of rotation, unless the user changes the phase sequence of the motor A, B, C wiring, otherwise there is no possibility of inversion.
6. Overload protection The inverter monitors the motor current. When the motor current exceeds 120%/1 minute of the set rated current, the inverter protects the motor by stopping.
7. Grounding protection The inverter is equipped with a special grounding protection circuit, which is generally composed of a grounding protection transformer and a relay. When one or two phases are grounded, the inverter stops immediately. Of course, if the user requests, we can also design to protect the shutdown immediately after grounding.
8. Short-circuit protection After the output of the inverter is short-circuited, it will inevitably cause over-current. The inverter will stop the motor to protect the motor within 10 microseconds.
9. Overclocking protection The inverter has maximum and minimum frequency limit functions, so that the output frequency can only be within the specified range, thus achieving overclocking protection.
10. Stall protection Stall protection is generally for synchronous motors. For asynchronous motors, the stall in the acceleration process must be manifested as overcurrent, and the inverter achieves this protection function through overcurrent and overload protection. Stall during deceleration can be avoided by setting a safe deceleration time during commissioning.
----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn
Geosynthetic clay liners (GCL) are high performance needle punched environmental reinforced composites which combine two durable Geotextile outer layers with a uniform core of natural sodium bentonite clay to form a hydraulic barrier. Fibers from the non-Woven Geotextile are needle punched through the layer of bentonite and incorporated into the other geotextile (either a woven or non-woven).when hydrated under a confining load, the bentonite swells to form a low permeability clay layer with the equivalent hydraulic protection of several feet of compacted clay.
Applications:
The water proof bentonite pad is mainly used in penetration-proof,airproof &separation in rubbish burying square,man-made lake,channel,pool,basement,subway,etc.
The production line processing of finished products with high peel strength, strong pulling hardness, low permeability.
Technical data:
Certificate:
Geosynthetic Clay Liner,Hdpe Geomembrane Liner,Waterproofing Geosynthetic Clay Liner,Anti-Seepage Geosynthetic Clay Liner
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com