Application and instructions for the roof dust collector

The top dust collector is based on the pore size of various powdery substances such as cement, fly ash, lime, etc. The effect of the particle size of the filter element of the dust collector on the pore size of the filter element through the maximum diameter and adhesion is fully satisfied. Filtration requirements. That is to meet the requirements of the air delivery of the bulk vehicle and the air delivery after the disassemble of the assembler. It also ensures that there is no negative pressure in the chamber when the powder material is used.

1. The filtering area is 13-72 square meters, and the area is smaller. 2, installation and maintenance is quick and convenient. 3, vibrating cleaning, easy to operate. 4, card filter, using imported materials. 5. The main raw materials are imported from Germany. 6, moderate performance and price ratio.

The working principle of the roof dust collector: the welding flange is welded together with the cement silo (or other powder container) as the support of the dust collector; the sealing cylinder is sealed and integrated with the welding flange by the connecting clip; the vibrating disc is clamped to Between the sealing cylinder and the upper cylinder; the filter element is assembled with the vibrating plate; thus, the filter element, the sealing cylinder box, the vibrating plate welding flange and the cement chamber form a common filter element to filter the barrel with the upper barrel. At the same time, the upper cylinder is connected to the atmosphere, as a gas discharge or supplement. When the bulk cement pump truck delivers the powder into the silo, there is a certain pressure difference inside the cement silo, and the gas is discharged from the inside of the silo, and the filter is used to filter the dust to purify the air; when the screw machine supplies the powder machine When the material pressure is lower than the atmospheric pressure, the air is supplied to the chamber to make the screw machine work normally.

The function of the main components of the dust collector:

First of all: the vibration motor, which is a three-phase motor with a constant eccentric oscillator. When the motor is running, the eccentric vibrator generates centrifugal force, and the vibration machine is vibrated as a whole; the vibration force can adjust the eccentric oscillator.

Secondly, the filter element is the most basic part of the precipitator, and it is the key to the accuracy and life of the precipitator. It mainly depends on the quality and usage of the filter cloth.

Finally, the vibrating plate is the main component of the cleaning work together with the vibrating motor, and the effect produced by it directly affects the cleaning degree of the filter element.

Global hardware network

Concerned about surprises

Label: application and instructions for the roof dust collector

Previous: Gear oil pump causes parts wear Next: Coal gangue crusher in crusher type

Civil Protective Mask

Fold Flat Mask,Civil Protective Mask,Kn95 Filters Cup 3D Mask,Kn95 Filters Fold Flat Respirator

Ningbo Autrends Prevention Products Co., Ltd , https://www.autrendsafety.com