Recently, with the result of the successful bidding for the office furniture procurement project of the Central Government Organs Government Procurement Center (hereinafter referred to as the “National Mining Centerâ€), the dispute over the designated supplier of Guocai Furniture has finally settled, which also marks the national mining. The central office's new office furniture procurement has also started again. The procurement scale has gradually stabilized. The designated procurement project of office furniture in the National Mining Center has attracted many enterprises from the industry to bid. The reason is that in addition to the honor of the “National Mining Center Fixed Supplier†and the attraction of the aura, the office furniture of the National Mining Center is designated. This "big cake" itself has also made companies look at it. It is understood that since the implementation of the official procurement of office furniture in 2005, the increase in the purchase of office furniture has experienced a rapid growth until the steady growth process, the number of procurement projects continues to increase, the purchase amount is basically increasing year by year. Statistics show that the scale of furniture procurement in Guocai Center has increased from more than 70 million yuan in 2005 to about 300 million yuan in 2010. "Overall, starting from 2007, the overall scale of centralized procurement of furniture in the National Mining Center has entered a stable period. The total amount of furniture purchases in the past four years averaged about 271 million yuan. In the first half of 2011, the scale of procurement of state-owned furniture was the same as that of the same period last year. The units of the central state organs have completed tens of thousands of purchases over the past few years, and the average savings rate has exceeded 10%.†The person in charge of the National Mining Center Furniture Project told the reporter that after several years of development, the National Mining Center has Most central units' furniture purchases have been included in the centralized procurement track. Therefore, the scale of purchase of furniture in the National Mining Center has entered a relatively stable stage. There are many companies participating in the shortlist for the new generation, and their respective strengths are uneven. How to ensure the quality of the designated enterprises is very important. The public bidding of the National Mining Center every year is a process of continuous evolution. It is understood that compared with last year, the scale of corporate competition this year has slightly expanded, and there are four more companies participating in the bidding, reaching 88. Among them, 51 companies bid for the first package of wooden comprehensive class a sub-package, 33 won the bid, the winning rate is about 33%; 10 bidding the first package of wooden comprehensive class b sub-package, 5 winning the bid, the winning rate is 50 %; 37 companies bid for the second package of steel comprehensive category, 20 won the bid, the winning rate is about 54%. "This year's furniture procurement project bidding, we are committed to creating a fair competition platform, through a reasonable evaluation mechanism and a standardized review process, so that the previously selected companies can have appropriate advantages, so that new participating companies have enough shortlisted Opportunity. On this basis, we guarantee that the new ones within a reasonable range will be renewed.†The person in charge of the project said that there will be winners and losers in the competition. Therefore, some new faces appear in the list of suppliers shortlisted this year, but the suppliers The main body still maintains stability. Compared with the list of short-listed suppliers of office furniture in the National Mining Center in 2010, the reporter found that 13 companies have missed the “cake†of the national mining center furniture again this year. At the same time, 13 other companies have become “Naxinâ€. Beneficiaries are fortunate enough to enter the fixed-point list. Strengthening post-regulation With the expansion of scale, the requirements for supervision and service will become higher and higher. “For us, one of the more difficult points of the fixed-point procurement project is how the collection and management institutions can guarantee the quality of project implementation through daily supervision, management and service.†The project leader said that this problem cannot be solved overnight. The mining center has continuously improved the level of service and supervision through various methods. It is reported that in order to better serve the purchaser, facilitate the daily work of the purchaser, and effectively improve the procurement efficiency, the new phase of the purchase of furniture in the National Mining Center will adjust the standard of the procurement limit, simplifying the procurement: The standard is raised from the original single budget amount of more than 20,000 yuan, less than 100,000 yuan to a single budget amount of more than 20,000 yuan, less than 200,000 yuan, each unit can directly determine the winning supplier from the fixed-point suppliers. At the same time, the purchase of office furniture with a single purchase budget of more than 100,000 yuan (inclusive) and less than 800,000 yuan will be raised to a single purchase budget of more than 200,000 yuan (inclusive) and less than 1.2 million yuan. The purchase budget is in the purchase range of 800,000 yuan (inclusive) to 1.2 million yuan. In addition, in order to better inspect suppliers, Guocai Center introduced a feedback mechanism for electronic evaluation of purchasers in the field of furniture procurement. The purchaser can make an evaluation based on the performance of the designated supplier in the whole procurement activity, and these evaluations will become the reference basis for the supplier's next competitive bidding qualification. At the same time, the purchaser can also intuitively understand the overall situation of the supplier through this evaluation mechanism, and select a fixed-point supplier with better reputation. In addition, the information fed back by each purchasing unit will be used as one of the evaluation criteria for each furniture enterprise in the next year. "Integrity is the most basic and core requirement of the company. One of the key points of our next step is to form a fixed-point furniture operation platform that the enterprise does not dare, does not want, and cannot engage in dishonest behavior through continuous improvement." The person in charge of the project said. In 2011, the tendering work for the fixed-point procurement of furniture in the central state organs was recently concluded. The furniture market with a purchase volume of about 300 million yuan this year has already become a must for manufacturers. It is understood that the project attracted 88 national furniture manufacturers to bid. In such fierce competition, how to organize this bidding and select outstanding suppliers in fair competition, this undoubtedly proposed to the organizer of the bidding work - the central government agency procurement center (hereinafter referred to as "the national mining center") Serious challenges. In this regard, the person in charge of the furniture project of Guocai Center told reporters that this year's furniture procurement project bidding, the National Mining Center is committed to creating a fair competition platform, so that the short-listed enterprises can have appropriate advantages, so that the newly participated enterprises have Enough chances for finalists. In fact, the good intentions of the National Mining Center can be seen at a glance from its bidding documents. In order to truly reflect the fair competition and reasonable and appropriate threshold setting, this bidding shows the characteristics of the electronic era compared with last year: one is the online bid opening, the other is the double quotation form, and the third is the subtle change of the scoring rules.
UPVC grille tube
PVC porous grille tube (9 hole bore four six) adopted hard modified polyvinyl chloride (PVC) as the main raw material, add amount of impact modifier, and other agents, moved by high speed mixing will extrusion molding, improve the compressive strength, anti-aging, and excellent properties such as corrosion, also known as the high strength grid tubes. (the ring stiffness is 346 kn / ㎡), bee tube: single-hole acuity 20 kn / ㎡, 27 kn / ㎡, the measured total 37 kn / ㎡, by about 13 times. Compressive strength of 900 kn / ㎡).Its shape is curved square Angle, arranged neatly.According to the pipe diameter, there are nine holes, four holes, five holes, six holes, seven holes, one hole and other kinds of specifications to choose from.
The PVC grid tube products have multiple hole bits, which can be directly put into the cable, and can be reserved for pipe holes to improve the utilization ratio of communication holes
Pieces of PVC grille tube connection structure of the socket, don't need any tools to complete the connection between pipe, convenient for construction and maintenance, PVC -u pipe and tube joint adopts special PVC glue, glue connecting sealing better, not easy ooze water.
The PVC grid tube is generally 6 m/root and is connected by a socket.Used for urban pipeline construction, can be used in cross section.The tube and the magnetic tube are integrated, no need to wear the cable, once formed, the compressive strength is high.
Communication engineering USES the advantages of PVC porous grid piping:
1.The pipe is light, which greatly reduces the construction labor intensity and convenient transportation.
2.The construction method is simple, which greatly reduces the construction cycle, especially the main road, the busy area, the Plastic Pipe and the municipal construction, the advantage.
3.The grille tube has certain flexibility, easy to pass through obstacles, choose route flexibility is larger.
4.The grille friction coefficient is smaller than the cement pipe, easy to set up the electricity (light) cable and raise the laying length.
Our client should be starting from the advantages of plastic grille type tubes, more from the reduction of labor intensity, more from shorten construction time consideration, especially during fiber development, should be the preferred type of plastic PVC grid tubes, grille, nine hole bore four six, made up of different aperture plastic pipe.
UPVC Grid Tube
Grille Pipe,Upvc Pipe,House Application Pipe,Grille For Construction
ZHEJIANG BOYA COMTECH CO.,LTD , https://www.zjbytx.com
