Tata wooden door is one of the earliest professional enterprises in China to develop, manufacture, sell and service finished product bedroom doors. It ranks among the top in network sales. This is closely related to the excellent products and perfect after-sales service of tata wooden doors. The sale of tata wooden doors is very important. Provide after-sales installation, where small series deliberately sort out the steps to install tata wooden doors, different brands of wooden door installation steps are similar, you may wish to find out how to install the wooden doors.
1. Assemble the door cover
First find out the door sleeve and the vertical plate, according to the back number for the good joint, mining on the same plane, apply glue on the interface, put the 80mm wood screw on the back hole of the interface, tighten it with a screwdriver Do not use the screws directly in the entry sleeve to check if the dimensions between the mining ports are correct, and if the joints are flat and dense, securely, and then install the iron plates on the back of the door hangers. When loading the iron plates, use 25mm of the self. For tapping screws, the distance between the iron plates should be 300-350mm, and the iron plate should be 200mm from the ground.
2, install the door cover
Put the assembled door cover into the door hole, use a small wooden bar to fix the door cover around, and both sides of the door cover should be on the same plane with the wall. Then check whether the whole door cover is vertical to the floor, and the top cover of the door cover and the two doors. Whether the two corners of the board are at a right angle or not, whether the door panel is bent or not, twist the iron pieces at both ends so as to wrap the wall. According to the position of the reserved hole on the iron plate, drill an 8mm hole on the wall with an electric hammer, plug it with a small wooden bar, and then fix the iron piece on the wall with a 80mm wood screw, and then use a small wooden bar to cover the door and the wall. The gaps between the bodies are filled and plugged. Re-examine whether the door cover matches the door and then insert the styrofoam. Decoration Network
3, install the door leaf
Open the page slot first. The distance between the hinge slot and the two ends of the door leaf should be 1/10 of the height of the door. The heavy door should be equipped with 3 hinges. The depth of the hinge slot should be the thickness of the single piece of the hinge. To install the hinge, use the screws that match the hinges. The screws must be tightened with a screwdriver. The screws cannot be driven directly by the boring head. After the hinge on the door leaf is fixed, the hinge on the door sleeve must be screwed first. Screws, and then close the door to check whether the left and right upper and lower slits are the same, whether the opening is flexible, confirm the correct, and then tighten the other screws.
4, install the door lock
According to the provided lock type installed to the corresponding position, the height of the lock position from the ground is 900-1000mm. After installation, check whether the door leaf and the door lock switch are flexible and whether the left joint meets the specification.
5, install door line
According to the confirmation of the size of the installation site, the door saw line with right-angled edge is cut into a 45-degree angle, trimmed with a flat file or a carpenter's plane, and the right-angled edge is inserted into the slot of the door pocket, and the door line is glued to the door panel with a floor glue. The 90-degree impact point has a uniform bevel, flatness, and tight joints. The joints of the door sleeve line are glued firmly, and a small straight nail is fixed at the top end of the door sleeve line and touches the corner nail.
6. Install the door stopper in the corresponding position.
The above is the whole process of wooden door installation. For more information on wooden doors, please pay attention to the information on this site.
More exciting recommendations:
[tata wooden door official website] tata wooden door installation method
What brand of wood door tata wood door brand advantage
Steel wood door surface treatment process and surface thickness
[steel door maintenance] What are the advantages of steel doors?
Wooden door brand wooden door installation switch decoration network
The Angle Grinder is a power tool used mainly for surface and circumference grinding (abrasive cutting or cut-off grinding) on various materials, but mainly metal. The mini angle grinders come with a speed of 10000RPM and 115/125mm disc diameters; large angle grinders are designed for heavy duty applications. They feature 180 or 230mm disc diameters and 1200 to 1500 watt.
Angle Grinder
Angle Grinder,Small Angle Grinder,Bench Grinder,Hand Grinder
AWLOP CO.,LTD , https://www.awlop.com