Heat transfer oil pump structural features: Heat transfer oil pump with self-heating cooling structure, changing the traditional water-cooled structure, so that the structure is simple, small size, saving running costs, good performance, reliable use, is our digestion and absorption of foreign oil pump developed on the basis of The second generation of products, the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the center vertical upward, and the same motor mounted on the base. Heat-conducting oil pump support using double-ended ball bearing structure, the front end with lubricating oil lubrication, the rear end with grease lubrication, the middle of a guide tube, to observe the sealing at any time and the recovery of HTF. Heat-conducting oil pump seal features: (1) the combination of packing seal and mechanical seal, packing seal with high temperature filler, has good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance Carbide material, to ensure the sealing performance under high temperature conditions. Heat transfer oil pump applications: heat transfer oil pump with advanced technology, high efficiency, under long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, etc., in our heating medium heating system has been widely used, Has entered the petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, roads, food and other industrial fields, mainly used for conveying non-solid particles of weakly corrosive high temperature liquid, temperature ≤ 370 ℃, is an ideal Hot oil circulation pump.
Anda Aluminum Co., Ltd. , http://www.chinacosmeticbeauty.com