It is very important to insist on the bearing and smooth and clean.

Home>Bearing knowledge>It is very important to adhere to the bearing and smooth and clean.
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

It is very important to insist on the bearing and smooth and clean.

Source: China Bearing Network Time: 2018-02-28

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
IKO bearing oscillation damage sensitive; such as shedding; indentation; rust; crack; wear, etc. will measure the IKO performance in the bearing oscillation; thus; after the special IKO bearing vibrometer application (frequency analyzer, etc.) to measure the oscillation of the large file The ridiculous sages and sluts lie 5 榭 丈. Measured value because IKO sensor bearing application or device orientation conditions are not the same;
Bearing temperature; the temperature outside the normal IKO bearing can be twisted; if it is a hole; can directly measure the outer ring temperature of IKO bearing; it is more suitable.
Under normal conditions; the temperature of the IKO bearing starts to rise slowly for 1-2 hours; to reach a stable condition. About the heat capacity of the machine, the normal temperature IKO bearing; the cooling capacity; the speed and load change. If it is smooth; the corresponding part of the device; IKO bearing is stunned The temperature rises; there will be abnormally high temperatures; the operation is stopped; the necessary precautions are taken.
The temperature sensor can monitor the operating temperature of the IKO bearing at any time; and complete the temperature beyond the specified value; to avoid active alarm or stop the ignition of the shaft.
Therefore; IKO bearing temperature monitoring is necessary; whether it is to measure the bearing itself or other important parts. If you are operating under the same conditions; any temperature changes; can be said to be a failure.
IKO bearing temperature can measure timing through, for example, digital thermometer thermometer; method; bearing temperature can accurately measure and unit °C or Fahrenheit display. For bearings; this means that when it is damaged; can cause equipment to stop; therefore the best IKO The importance of the bearing type should be the temperature sensor.
Usually; if the correct use of imported bearings; can be used until the arrival of fatigue life stops, but there will be accidental premature injury; the situation is not used. This early damage; relative to the fatigue life; is called fault or The application of the quality of the event is limited. It is caused by the inconvenience of the device, the application, and the smoothness; the foreign matter invading from the outside; the research on the thermal influence of the shaft and the outer casing is not sufficient.
About the damage condition of IKO bearings, such as: the ferrule of the roller bearing and the shank of the rib; the reason can be considered; the lack of smoothing agent, the unsuitability, the disadvantage of the oil supply structure, the intrusion of foreign matter, the bearing device error, the shaft The deflection is too large; there will be coincidences.
Therefore; only query bearing damage; it is difficult to know the true cause of the damage. However, if you know the IKO bearing application machinery, operating conditions, the structure around the bearing, know the situation before and after the incident; contact IKO bearings damage and several The cause of the species is investigated; it is possible to avoid recurrence of similar incidents.
Recommend to friends comments close window

Bearing related knowledge
Imported bearing device smooth grease in the seven major misunderstandings in the bearing repair application
NTN bearing layout and features


This article links to http://
Please indicate the bearing network http://

Previous:The main bearing of the steel ball mill has a large gap and is too small. How to do it: The characteristics of the solid inlaid self-smooth bearing series

High Density Polyethylene (HDPE) sheet is extremely strong against impact, abrasion resistant, and exhibits a low coefficient of friction. The material is also moisture, stain, and odor resistant, and is FDA approved for use in the food processing industry (mainly for cutting boards). The material's durability makes it a perfect match for a variety of applications such as water tanks, chute linings, bottle/bottle cap production and numerous other industrial uses.


HDPE Plastic Sheet

Color: White, Black, Red, Blue, Beige, Green, Grey, etc.

Thickness: 0.4-250mm

Size: 1220*2440/1000*2000/1500*3000 mm


HDPE Plastic Rod

Color: White, Black

Diameter: 10-400mm

Length: 1000mm


PE Sheet and Rod

PE

Polyethylene Sheet, HDPE Sheet, HDPE Plastic Sheet, Food Grade PE Sheet and Rod, Rolling Pin, Chopping Board

SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , https://www.xyhplastic.com