For the working class, it is really rare to buy large flats in big cities. The developers have seized the psychology of the working-class people and constantly improved the types of duplex buildings. For this reason, many people have chosen the duplex building, but the duplex building. The decoration pattern also needs our attention. Now everyone is most concerned about the number of square meters in the complex building? Today, Xiaobian will come with everyone to see how many square meters and duplex building decoration considerations in the complex building!
How many square meters is the duplex building?
The duplex building is usually 180-400 square meters, which is only normal and does not include conditions, such as the number of people in the home, or the condition of keeping pets.
How does the duplex building calculate the area?
Usually, a penthouse is a set of residential buildings on two floors with internal stairs to connect the upper and lower floors; generally the living, kitchen, dining room, and bathroom are arranged on the first floor. It is best to have a bedroom and a bedroom, study, and bathroom on the second floor. Wait.
The duplex house is conceptually a floor, but the height of the dwelling is higher than that of an ordinary dwelling (usually 2.7 m). The mezzanine can be partially removed, and the bedroom or study can be arranged and connected by stairs. Its purpose is to increase the use of space in a limited space and improve the space utilization of the home.
The three major considerations for the renovation of the duplex building:
One: each floor needs to be divided into distribution
The duplex room is divided into distribution boxes, which is conducive to safe use of electricity, protection of wires and reduction of faults. For example, in a duplex room, a socket wire is pulled from the bottom layer to the upper layer, and the line is long and the power loss is large. In addition, when the distribution boxes are divided, they must not be connected from the distribution box. Instead, separate the distribution boxes from the meter boxes. Otherwise, once tripped, the overall trip will be caused, which will affect the overall use.
Some houses have adopted a three-phase four-wire system, but the power balance must also consider the current balance, otherwise it will cause a trip.
Two: water heaters with different heating methods
If an electric water heater is used, it is recommended to use one water heater independently for each bathroom, which can save energy and save water resources, and at the same time reduce the renovation cost.
If a gas water heater is used, the bottom floor can be shared between the kitchen and the bathroom. However, it should be reminded that even if all of them are strong exhaust gas water heaters, safety issues must be considered. Remember to not place the water heater in the bathroom (gas burning will consume oxygen).
For the second floor, if a layer of gas water heater is used to supply hot water, there may be insufficient hot water supply due to water pressure problems. The solar water heater is used to transport hot water to the duplex layers through the flue pipe, but it must also consider the fixing problem of the water pipes.
3, security questions
In the pursuit of beauty together, security questions can not be ignored. Is the armrest firm and secure? Is the turning point too sharp? Is the ladder surface too smooth? These are the safety hazards of thinking in the complex building. The balcony glass on the first floor does not have a safety barrier at all, so it is necessary to think about it beforehand. At the end of the renovation, protective windows and protective doors must be added.
If you have a duplex room, do you know more about how to decorate, and hope to bring help to everyone's decoration. The above is the introduction of Xiaobian today, and it is over here. If you want to know more information, please continue to pay attention to the decoration home.
The Pipe Anticorrosion Materials is a multilayer system used for the protection of steel pipelines. Liquid Adhesives can be used as primers for this system.In addition to serving as primers, these liquidadhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer0 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer ,achieves a complete bond to the inner layer, providing maximum handling and in-service protection for the coating system. The adhesives in these and all POLYKEN tape systems contain proven anti-microbial additives.
Pipe Anticorrosion Materials
Pipe Anti Corrosion Materials,Anti-Corrosion Pipe Repair Tape,Anticorrosion Pipe Wrap Tape,Gas Pipe Tape
Jining Qiangke Pipe Anticorrosion Materials CO.,Ltd , https://www.pipe-wrap-tape.com