Architectural coatings are one of the indispensable materials for social and economic development. Due to the special role of architectural coatings, there are a wide variety of coatings. The Ministry of Chemical Industry, which has been on the market, has issued as many as nearly 1,000 types of coatings, and has long formed a variety of methods for classifying the materials according to the habits. These paint classification methods have their own characteristics. The following small series for everyone to introduce what architectural paint and architectural paint purchase considerations.
What are the architectural coatings
1. Synthetic resin emulsion sand wall architectural paint gives us rich texture and vivid colors. And water resistance and weather resistance can stand the test. It belongs to high-grade architectural paint with excellent performance.
2. Multi-layer coating There are more coatings available under the name, including low-viscosity coatings that increase adhesion, primary coatings that enhance texture, and topcoats that increase durability. Multilayer coating can be used for interior and exterior wall and ceiling decoration of buildings. If you want your new home to give you a feeling of luxury and dignity, then you can consider using it.
3, synthetic resin emulsion interior wall coating can be based on its use of synthetic resin emulsion analysis of its performance and grade. Synthetic resin emulsion interior wall paint is currently the main interior wall paint. Due to the presence of color differences, it is recommended that you choose a slightly lighter color than your favorite color.
4. Synthetic resin emulsion exterior wall coating belongs to water emulsion type exterior wall coating. It is generally used for the decoration and protection of buildings. This architectural paint has a good decorative effect and durability, we can stir with a stir bar at the time of purchase, if it is easy to mix and there is no hard block, it is qualified.
5. Solvent-based exterior wall architectural paint is a very practical exterior wall paint. It not only can modulate a variety of colors, but also has a long color retention time. Special attention must be paid when using, solvent-based exterior paint can not be used on the wet grass, organic solvents are flammable, and some are toxic.
6. Inorganic architectural coatings are coatings that form thin coatings on buildings. Its main purpose is spray painting for exterior wall decoration, brush or roller coating. The advantages of inorganic architectural coatings are rich raw materials, low cost, and excellent performance.
7, Polyvinyl silicate glass interior wall paint, mixing a certain amount of pigments, fillers and auxiliaries, and then mixed grinding, dispersed into a water-soluble paint. The raw materials for this interior wall paint are readily available and its price is cheap. Polyvinyl silicate water glass interior wall coating is suitable for general civil interior wall decoration.
Architectural Coatings Precautions
1. Environmental protection is particularly important for architectural coatings, especially interior wall coatings, because interior wall coatings are closely related to people's lives. With the development of society and the continuous improvement of the living standards of many consumers, as well as the improvement of their own health status and quality of life, people are more eager for health and environmental protection and require interior coatings to be environmentally friendly.
2. Buildings with different economic costs have different decorative requirements, and therefore different types of architectural coatings should be used. It goes without saying that its economic cost is closely related to the level of decoration. When choosing a coating, you should also pay attention to the price/performance ratio of different types of products. Coatings with good cost-effectiveness can be accepted by the market.
3. Durability is particularly important for architectural coatings, especially for exterior wall coatings. The properties include weatherability, water resistance, and the like. Coatings for exterior wall coatings are exposed to the atmosphere all year round. They are subject to weather changes throughout the year. Under the influence of sunlight, wind and rain, cold and heat, the coating is prone to cracking, chalking, discoloration, blistering, shedding, etc. The defects will cause the coating to lose its original decorative effect and protection function. The coating will become unrecognizable and will seriously affect the appearance of the building and damage the appearance of the city.
4. When choosing coatings, consideration should be given to selecting the coordination between the coating, the building and the surrounding environment, and considering the complementary effects of the architectural shape design. The decorative effect of the paint The decorative effect of the building is determined by three aspects: texture, line shape and color. The line shape is determined by the building structure and design scheme, and the texture and color can be determined by the paint. The decorative effect of paint is mainly reflected in three aspects: texture, color and luster. Texture is the characteristic feel of materials, such as thick and thin, flat and solid. Color is the most noticeable issue in decorative effects. The color of the paint reflects the artistic style of a building. Gloss is the physical properties of the coating. In architectural decoration, different parts have different requirements for luster.
Editor's summary: What are the architectural paints and architectural paint purchase notices are introduced here, I hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.
Architectural Coatings
Indoor Lighting is an important part of indoor environment design, and indoor lighting design is conducive to people's activities and safe life.
Indoor Lighting
Indoor Lighting,Led Tube,Led Panel Light,Indoor Light
Guangzhou ZG Scaffolding.co.Ltd , https://www.zgscaffolding.com