Handmade gold foil wallpaper construction notes:
1. The construction should check the moisture content of the wall (check the way: use a small iron pad under the electric iron to paste the wall to heat the wall). Or use the hair hygrometer to close the wall for 20 minutes, determine the humidity and then apply the wallpaper. If the wall (ceiling) is humid and the air humidity is high, it is necessary to use the sun lamp and the electric fan to illuminate and blow the required construction. The time should be more than 24 hours, after the moisture is reduced, the wallpaper is posted, and the wallpaper is posted. Then use the fan to blow the surface of the wallpaper for 24 hours to increase the drying speed of the wallpaper. The above operation requirements generally refer to the operation of the wall when the wall is humid and the upper surface of the building wall is poorly ventilated.
2. Wall brush varnish is selected with 93# gasoline diluted varnish, brush it once, and dry for 24 hours before posting wallpaper to keep the space on top.
3. The glue for the gold wallpaper is made of high-quality wallpaper glue. It is recommended to use Japan's alkali-based wallpaper glue construction.
4. If the construction is not checked, the humidity of the construction wall will cause the color change of the wallpaper seams at your own risk.
Steel Plate,Steel Pipe,Steel Bar,Steel Wire
NiCr Alloy,Stinless Steel,Nickle Alloy,Aluminium Co., Ltd. , http://www.nsnicklealloy.com