Correctly handles common shower failures

Correctly handles common shower failures Shower Frequently Asked Questions Q: When I showered with a rain shower, I found out that the water was not a jet-like stream of water. In some places, it was a thick column of water. What should I do?

A: There are two reasons why the shower fine water turns into thick and thin mixed water. First, the spray method of your home shower is adjustable. You can turn the sprinkler to adjust it. If it is not the reason for the adjustment, the dirt in the nozzle is too dirty. Caused by a lot, a small round cap in the middle of the sprinkler was opened with a small flat screwdriver, and the screw was screwed off with a twisted screwdriver, and the shower was opened and rinsed with a toothbrush to wash the shower hole, and then installed and restored. With the sprinkler adjustment function, there are usually several types of water outlets, and the adjustment of the adjustment tray will have more internal results for function conversion, such as shower, large and small pulses, and mixed functions.

Q: When showers are used for a long time, they often block, and some holes are out of water, and some are not. What to do?

A: There are two kinds of shower spouts on the market. One is a hard material. Only use clean needles to remove dirt when cleaning. There is also a soft material, usually silicone, which can be removed by hand. It is recommended to use the latter one. However, since the quality and grade of silicone are not the same, it is necessary to ask carefully when purchasing.

Added: The mask on the shower head usually contains a mask self-cleaning sheet. The function of the self-cleaning sheet is to regulate the amount of water, and it is also used for cleaning. Self-cleaning sheets are generally made of rubber or silicone.

Handle shower failure 1: Small basin faucet and kitchen faucet produce little water, no bubbling. Possible causes: Low water pressure causes the bubbler to be unable to produce air bubbles. Solution: Remove the faucet for a new bubbler 2: Hose Possible cause of leaks at connection points with the faucet: Improper installation, deformed rubber rings, uneven or thin outlet fittings, or mismatched hoses and faucets.

Solution: Select the appropriate hose and faucet according to the specifications, replace the rubber ring, and reinstall it.

3: The temperature of the water is too low. Possible causes: The power of the water heater is insufficient, and the temperature is not adjusted. Solution: Adjust the temperature control button or buy a larger outlet water heater.

Double Wall Corrugated Pipe is a kind of thermoplastic resin material; New material double wall Corrugated Pipe has very good mechanical properties, tensile strength around 60 mpa. In the process of pipe to add a few auxiliary agent can make the PVC pipe with flame retardant, acid and alkali resistant, wear resistant performance, and the most important for threading pipe insulation. These excellent features make burying double wall corrugated pipe occupied large market.

HDPE/UPVC Double Wall Corrugated Pipe/Tube

Double Wall Corrugated Pipe,Plastic Twin-Wall Corrugated Pipe,Burying Double Wal Corrugated Pipe,Connecting Pipe Materials

ZHEJIANG BOYA COMTECH CO.,LTD , http://www.zjbytx.com