Photovoltaic power generation.
In theory, photovoltaic power generation technology can be used in any occasion where power is required, from spacecraft, down to household power, to megawatt power stations, small to toys, and photovoltaic power everywhere. The most basic components of solar photovoltaic power generation are solar cells (sheets), such as monocrystalline silicon, polycrystalline silicon, amorphous silicon and thin film batteries. Among them, single crystal and polycrystalline batteries have the largest amount, and amorphous batteries are used for some small systems and calculator auxiliary power supplies. At present, the efficiency of polycrystalline silicon cells is about 16% to 17%, and the efficiency of single crystal silicon cells is about 18% to 20%. A solar panel consisting of one or more solar cells is referred to as a photovoltaic component. Photovoltaic power generation products are mainly used in three aspects: one is to provide power for non-electrical occasions; the other is solar energy daily electronic products, such as various types of solar chargers, solar street lamps and solar lawns, etc.; This has been widely implemented in developed countries. By 2009, China's grid-connected power generation has not yet begun to be fully promoted. However, part of the 2008 Beijing Olympic Games was powered by solar power and wind power.
Composite Geomembrane is a new type of anti-seepage material made by infrared ray heat with Geotextile(PET) and Geomembrane (PE .)
Including:
1) One layer geotextile and one layer membrane ; Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-1.5mm .
2) Two layers geotextile and one layer membrane ; Weight of base geotextile : 80g/m2-600gm2 ; Thickness of geomembrane :0.2mm-1.5mm .
3) One layer geotextile and two layers membrane ; Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-0.8mm .
4) Multi-layers : Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-1.5mm .
Composite Geomembrane applied range
1,Landscape engineering: garage top greening, roof garden, football field, golf course, beach project.
2, Municipal engineering: road base, subway, tunnel, landfill.
3, Construction engineering : upper or bottom layer of building foundation, basement wall, bedding filtration and heat insulation.
4, Traffic engineering: highway, railway basement, dam and slope.
Composite Geomembrane technical index
(Confirming GB/T17642-1998 standard)
Product weight (g/m2) |
|
|
|
|
|
|
|
||||
400 |
500 |
600 |
700 |
800 |
900 |
1000 |
|||||
SPEC |
1 layer geotextile+1 layer geomembrane |
150/0.25 |
200/0.3 |
300/0.3 |
300/0.4 |
300/0.5 |
400/0.5 |
400/0.6 |
|||
2 layer geotextile+1 layer geomembrane |
100/0.2/100 |
100/0.3/100 |
150/0.3/150 |
200/0.3/200 |
200/0.4/200 |
200/0.5/200 |
200/0.5/250 |
||||
Breaking strength ,kN/m |
5.0 |
7.5 |
10.0 |
12.0 |
14.0 |
16.0 |
18.0 |
||||
Elongation at break |
30---100 |
||||||||||
Tear strength , kN |
0.15 |
0.25 |
0.32 |
0.40 |
0.48 |
0.56 |
0.62 |
||||
CBR Mullen burst strength |
1.1 |
1.5 |
1.9 |
2.2 |
2.5 |
2.8 |
3.0 |
||||
Vertical permeability coefficient |
k *10-11~k*10-13 |
||||||||||
Hydraulic pressure |
0.4~0.6 |
0.6~1.0 |
Certificate
Composite Geomembrane
Composite Geomembrane,Composite Earthwork Film,Composite Geomembrane For Landfill,Pe Composite Geomembrane
Shandong Tianhai New Materials Engineering Co., Ltd , http://www.chinatinhy.com