Home>Bearing knowledge> Bearing capacity of joint bearings |
Bearing capacity of joint bearings
Source: China Bearing Network Time: 2018-03-31
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The additional dynamic load C of the joint bearing is the maximum allowable value assumed by the following assumptions; that is, the joint bearing with the assumed load effect; the sliding surface data is paired with steel/steel; and the lubricant is periodically compensated; the load strength is 100MPa.
The additional static load C0 of the joint bearing refers to the maximum load that can be accepted when the joint bearing or rod end joint bearing is at a stop or very low speed. Under the effect of additional static load; the sliding operation appearance of the joint bearing and the rod end joint bearing And the link parts will not cause harmful residual deformation.
The safety factor for the rod end joint bearing and the regular link member without the occurrence of the yielding appearance is 1. 2.
Recommend to friends comments close window
Bearing related knowledge |
How to identify the basic type and characteristics of the single-row angular contact ball bearing of the counterfeit bearing? According to the outer diameter of the bearing, the size of the bearing is classified. The thrust bearing: After the device, the bearing clearance analysis and selection method are also needed. |
This article links to http://
Please indicate the bearing network http://
Previous:Discussion on the method of distinguishing the authenticity of NSK bearing. The next part: Analysis of the bearing in the operation of mine trucks
Mirror Light,Mirror with Lights,Vanity Mirror Light,LED Mirrors
Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com