Paving solid wood flooring prevents four situations from occurring

The durability of the floor is "three-point product, seven-point installation". The service life of solid wood flooring depends on the level of paving. Experts cautioned that four kinds of situations should be prevented when laying floors.

Prevent unevenness on the ground.

The unevenness of the ground will cause some floors and keels to hang, and it will make a sound when stepping on.

Prevent the keel from drying out.

Undried wood keel moisture content is usually around 25%, while the qualified wood flooring moisture content is generally 12%, the humidity difference is too large to make the wooden floor absorb moisture quickly, causing the floor to arch, paint burst.

In the construction, the floor is first spread, and then other constructions are performed on the floor. However, after the floor is laid, it often takes a month or more before it can be polished. During the period, there were no isolation measures for the water vapor and chemicals on the floor and surrounding environment, which may cause the wooden floor to be deformed due to the rapid change in water content.

To prevent the assembly too loose or too tight.

When laying the floor, the tightness of the assembled wooden floor should be reasonably arranged according to the ambient temperature and humidity of the place of use. If it is too loose, there will be a large gap in the floor contraction. When it is too tight, the floor will arch when it expands.

Prevent the use of wooden wedges and nails.

The use of wood wedges and nails in the construction method will cause the nail holding force to be insufficient due to the small contact surface between the wood wedge and the nail, which can easily cause the wooden keel to loosen and cause a sound when stepping on the floor.

Floor paint

Stainless Steel Mesh is widely used in industrial field.

Stainless Steel Welded Wire Mesh

Material: stainless steel wire, Low carbon steel wire.

Weaving: Dipped galvanizing after weaving, weaving with hot dipped galvanized iron wire, Electric galvanizing after weaving, Weaving with electric galvanized iron wire, PVC coated Welded Wire Mesh .

welded wire mesh1welded wire mesh2welded wire mesh3welded wire mesh4

Stainless Steel Decorative Wire Mesh

Decorative wire mesh for architectures are popularly used in decorations of exhibition halls, hotels and luxurious room decorations as screens, also inside and outside decorations in superior office buildings, shopping center and sports center, ceilings, walls, stairs and railings. Decorative wire mesh fabrics offer certain protection as well as the good decorative effects.

decorative wire mesh4_decorative wire mesh2_decorative wire mesh3_decorative wire mesh5_

Stainless Steel Crimped Wire Mesh

It made of crimped metal wire in waves, with the position of the two waves opposite to each other to guarantee the uniform of the opening.

Use: As wire mesh for pig breeding, mine and stone works, glass factory, coal mine, petroleum, hardware products, etc.

stainless steel crimped wire mesh1 stainless steel crimped wire mesh2

stainless steel wire mesh

1. Material: SUS302, 304, 304L, 316, 316L

2. Mesh Counts: 8-500mesh (how many holes in one inch)

3. Wire Diameter: 0.025mm-0.558mm

4. Aperture/in Microns: 26-2617

5. Weaving Type: Plain Weave, Twill Weave and Dutch Weave

6. Length and Width: 1m*30m

7. Packing: waterproof paper, plastic bag, wooden case

stainless steel wire mesh


 

Stainless Steel Mesh

Decorative Mesh,Welded Wire Mesh,Stainless Steel Wire Mesh,Crimped Wire Mesh

Hebei Yishen Wire Mesh Products Co., Ltd , http://www.ysgabionmesh.com