There are many types of fragrant machines, such as fully automatic fragrant machinery, fully automatic computerized automatic, fast automatic fragrant machines and many other types. Below, the manufacturer of the fragrance machine will give you a detailed introduction.
The fast automatic fragrant machine has high output, good quality and fast speed. It can produce more than 6,000 pieces per hour. The cost is greatly reduced, and it is not necessary to be familiar with the manual. The operation is easy to learn, easy to use, and the warranty is simple. High safety performance, safety valve, no valve can not start, no automatic reminder of powder and automatic return to save time.
The fully automatic fragrant machinery is the most commonly used and best-performing equipment. It is a versatile scenting machine that can be used for both large and small fragrances. It is easy to operate by one person, and the quality is excellent. It can produce 0.3 cm per day. Smokeless incense and other special varieties of incense can be produced normally. It is easy to learn, smooth in operation, saves labor costs, and the products are bright, the production variety is comprehensive, and the space is small.
The fully automatic computerized automatic scenting machine is fast in production, and the two can operate five machines at the same time, greatly reducing the labor cost. Good quality, not hot, no powder, light body, strong fragrance, beautiful appearance. Significantly reduce the cost: first dye the scented core and then do not need to dye the foot again, automatic molding to avoid the foot, the viscosity can be reduced by about 10%, the color material can be reduced by about 50%, without the use of combustion improver. The fragrance is fast, does not change color, the fragrance is not volatile, and the product is more fragrant and richer, which can reduce the fragrance by about 30%.
Related articles recommended:
Road brick machine cement block machine hydraulic brick machine
DHL Beijing Beijing DHL International Express Baoding UPS Freight Phone Fragrance Machine
Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com