First, apple potassium deficiency symptoms:
The leaf margins of the basal and middle leaves are chlorotic yellow and often curl upward. When the potassium deficiency is heavy, the chlorotic part of the leaf margin becomes brown and coke. In severe cases, the whole leaf is scorched and hung on the branch, which is not easy to fall off.
Correction method:
Ample organic fertilizer is applied in the autumn. At the beginning of the expansion period of young fruit, 20 to 25 kg of potassium sulfate or 15 to 20 kg of potassium chloride are applied per mu. The foliar spray portion is 0.2%-0.3% potassium dihydrogen phosphate aqueous solution, or 1%-2% potassium sulfate or potassium chloride.
Second, apple potassium excess symptoms:
It is easy to induce magnesium deficiency, which is affected by the absorption and utilization of nitrogen, calcium, iron, zinc and boron. The peel is thick, the hardness is small, and it is easy to be woven, and it is not stored and stored.
Correction method:
Increase irrigation and reduce the concentration of potassium in the soil. Potassium fertilizer should be used sparingly if livestock excrement is used.
Third, skillfully apply potash
The absorption of potassium by apple trees is less in the early stage of growth, and gradually increases later. The critical period of absorption is in the middle and late growth stages, generally from July to August. Applying the right amount of potash to the fruit trees during this time will get twice the result with half the effort. If the same amount of potash is applied before early spring or flowering, there will be no obvious effect on the yield and coloration.
When applying potassium fertilizer, potassium sulfate should be selected with high absorption efficiency and obvious effect, followed by potassium chloride, or organic fertilizer with high potassium content such as grass ash or decomposed chicken manure can be applied under the tree, and then Shallow watering. If the leaf surface spray is supplemented with 0.3% to 0.5% potassium dihydrogen phosphate solution or amino acid potassium 300-500 times solution, good results can also be obtained.
A ballcock (also balltap or float valve) is a mechanism or machine for filling water tanks, such as those found in flush toilets, while avoiding overflow and (in the event of low water pressure) backflow. The modern ballcock was invented by José Antonio de Alzate y RamÃrez, a Mexican priest and scientist, who described the device in 1790 in the Gaceta de Literatura Méxicana.[1] It consists of a valve connected to a hollow sealed float by means of a lever, mounted near the top of the tank. The float is often ball-shaped, hence the name ballcock. The valve is connected to the incoming water supply, and is opened and closed by the lever which has the float mounted on the end. When the water level rises, the float rises with it; once it rises to a pre-set level, the mechanism forces the lever to close the valve and shut off the water flow. This is an example of negative feedback and of proportional control.
Ball Cock, Brass Ball Bibcock, Ballcock Valve, Toilet Ballcock Valve
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valves.com