Plastic Welding Machine for Thin Materials

Model NO.: ZX3400
Body Material: PA66
Accessories: Brush, Nozzle, Silicone Roller
Printing: Can Be Your Logo
Warrange: 12 Months Except Ceramic Heating Element
Trademark: HEATFOUNDER
Transport Package: Carton Box or Tool Box
Specification: 1.8kg
Origin: China
Model NO.: ZX3400
Body Material: PA66
Accessories: Brush, Nozzle, Silicone Roller
Printing: Can Be Your Logo
Warrange: 12 Months Except Ceramic Heating Element
Trademark: HEATFOUNDER
Transport Package: Carton Box or Tool Box
Specification: 1.8kg
Origin: China
Plastic welding machine for thin materials 
 
Hot air welder
Temperature controll We use photocell to controll temperature inside.
Temperature switch Outside of the gun there is temperature switch.
And once the plastic body is above 135 degree,the whole circuit will be cut off.
Plastic material At present,this plastic is one can resist the highest temperature.
It can resist 280 degree.
Bearing We use high temperature bearing manufactured in Japan.
Ceramic heating element We use Swedish heating wire for ceramic heating element inside the hot air gun.
And ceramic material is also good quality.
It can resist high temperature 1650C.

TECHNICAL DATA:
ZX1600 ZX3400 1.Power cord
Voltage(V) :42 100 120 200 230 For 50/60Hz Voltage(V) :200 230 For 50/60Hz 2.Main switch 3.Screw on the clamp
Power consumption(W) :960 1400 1600 Power consumption(W) :3400 4.Potentionmeter for temperature adjustment
Weight (kg) :1.3 with 3m cord Weight (kg) :1.4 with 3m cord 5.Handle & Nozzle
Temerature :20-700 degrees Celsius,infinitely controlled 6.Air fillter
Air flow (1/min) :Max.230 7.Rubber stand
Air pressure (pa) :3000 (30mbar)after about 24 h operating time 8.Adapter tube
Size (mm):Customized 9.Heat protection tube

APPLICATION:

Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.

Detailed pictures:
Plastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin Materials Plastic welding machine for thin materials 
 
Hot air welder
Temperature controll We use photocell to controll temperature inside.
Temperature switch Outside of the gun there is temperature switch.
And once the plastic body is above 135 degree,the whole circuit will be cut off.
Plastic material At present,this plastic is one can resist the highest temperature.
It can resist 280 degree.
Bearing We use high temperature bearing manufactured in Japan.
Ceramic heating element We use Swedish heating wire for ceramic heating element inside the hot air gun.
And ceramic material is also good quality.
It can resist high temperature 1650C.

TECHNICAL DATA:
ZX1600 ZX3400 1.Power cord
Voltage(V) :42 100 120 200 230 For 50/60Hz Voltage(V) :200 230 For 50/60Hz 2.Main switch 3.Screw on the clamp
Power consumption(W) :960 1400 1600 Power consumption(W) :3400 4.Potentionmeter for temperature adjustment
Weight (kg) :1.3 with 3m cord Weight (kg) :1.4 with 3m cord 5.Handle & Nozzle
Temerature :20-700 degrees Celsius,infinitely controlled 6.Air fillter
Air flow (1/min) :Max.230 7.Rubber stand
Air pressure (pa) :3000 (30mbar)after about 24 h operating time 8.Adapter tube
Size (mm):Customized 9.Heat protection tube

APPLICATION:

Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards,tubes profiles,lining membranes,coated materials,films,foams,tiles and sheets.The following procedures are possible :Overlap welding ,welding with rod,with tape,butt welding and melt welding.
Heating - up for forming,bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves,films,tapes,solder sleeves,pre formd and moulded parts.
Soldering of copper pipes,solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings,paper,coal or straw in furnaces.

Detailed pictures:
Plastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin MaterialsPlastic Welding Machine for Thin Materials

Garbage Disposal

Moen Garbage Disposal,Cleaning Garbage Disposal,Kitchenaid Garbage Disposal,Removing Garbage Disposal

Xinhe Stainless Steel Products Co., Ltd. Of Pengjiang District Jiangmen City , https://www.sinkhall.com