Do you know the classification of explosion-proof levels?

Definition of explosion-proof level
The classification of explosion-proof electrical equipment is based on the type of equipment used, the temperature group of the explosive gas mixture, and the type of explosion-proof electrical equipment.
Explosion-proof electrical equipment is divided into two categories: Category I is electrical equipment for underground coal mines; II is electrical equipment used in places other than mines, and is distinguished according to the large test safety clearance (MESG) or small ignition current (MICR). The equipment is divided into three categories: IIA, IIB and IIC.
The above four categories are mainly based on the small spark energy that may be detonated under different working conditions. China and Europe and most countries and regions in the world will divide explosive gases into these four hazard levels. The specific differences are as follows:
Group comparison
Secondly, according to the difference in ignition temperature of explosive gas mixtures, the groups are divided into T1, T2, T3, T4, T5, and T6. The ignition temperature is represented by t (℃), and the ignition temperature of each group is :
T1 is: 450 ℃
T2 is: 300 ℃
T3 is: 200 ℃
T4 is: 135 ℃
T5 is: 100 ℃
T6: 85 ℃
Again, for different uses, the explosion-proof types of explosion-proof electrical appliances are different. The types include: 1. Explosion-proof type, marked d;
2. Increased safety type, marked e;
3. Positive pressure type, the mark is P;
4. Intrinsically safe type, the symbol is i,
5. Oil-filled type, the mark is o;
6. Sand filling type, the symbol is q;
7. No spark type, the mark is n;
8. Pouring seal type, the mark is m;
9. Airtight type, the symbol is h.
Examples
The explosion-proof mark is dIIBT4, which represents: the type of explosion-proof electrical products is flameproof. It is a class IIB (category) used in a class II place, and the ignition temperature of explosive gases is T4.


We are involved in offering high-quality Cnc Plasma Cutting Machine to our valuable customers. These products are made from high-quality components.Our company are prominent manufacturers and exporters of high-quality Auto Duct Forming and Cut to Length Machines. Offered products range consists of Auto Duct Forming Machine, Cut to Length Machine and Roll Former Machine. All offered products are manufactured under the direction of experts using quality tested material and latest technology as per industry norms. Sturdy designs, fine finish, high strength, long service life and damage resistance are features of our offered range of products.

Gantry Double Plasma Cnc Cutting Machine is a stereotyped product carefully developed by our company. It has high processing efficiency and is 2.2 times of single gun cutting. It is a numerical control equipment for metal sheet blanking. It not only has an appearance atmosphere, but also has stable operation, high work efficiency and long service life. It can realize cutting of any metal material according to any pattern. It is widely used in the cutting of sheet metal in various mechanical manufacture industry.

Type

BLDS-3060

BLDS-4080

BLDS-5080

BLDS-60100

BLDS-80100

Input power

AC380V/50Hz; AC220V/50Hz

Track gauge(mm)

3000

4035

5000

6000

8000

Effective cutting width(mm)

2300

3300

4300

5300

7300

Machine width(mm)

3500

4300

5500

6500

8500

Track length(mm)

6000

8000

8000

10000

10000

Number of cutting torch(set)

2

2

2

2

2

Lift(mm)

200

Cutting thickness(mm)

1~30(According to the power supply size)

Cutting speed (mm/min)

450~5000

Idle speed(mm/min)

0~8000

Drive mode

Bilateral drive

System

Shanghai Jiaoda or Beijing Starfire

Operating accurancy

±0.5mm



Gantry Double Plasma Cutting Machine

Cnc Plasma Cutting Machine,Cnc Full Mato Cutting Machine,Gantry Double Plasma Cnc Cutting Machine,Double Plasma Cnc Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com