Filter maintenance and maintenance methods are: â—, coarse filter 1, the core part of the filter is the filter core, the filter element by the filter box and stainless steel wire mesh, stainless steel wire mesh is the best parts should be special Protection; 2, when the filter work for a period of time, the filter core precipitated a certain amount of impurities, then the pressure drop increases, the flow rate will drop, the need to promptly remove impurities in the filter core; 3, cleaning impurities, especially Note that the stainless steel mesh on the filter can not be deformed or damaged, otherwise, reloading the filter, the purity of the filter media reach the design requirements, compressors, pumps, meters and other equipment will be destroyed; 4, if found Stainless steel mesh deformation or damage, need to be replaced immediately. â—, precision filter 1, the core of the precision filter is the filter element, the filter element is made of special materials, which should wear parts, need special protection; 2, when the precision filter work for a period of time, A certain amount of impurities, then the pressure drop increases, the flow rate will decline, the need to promptly remove impurities within the filter, while cleaning the filter; 3, in the removal of impurities, special attention to precision filter, shall not be deformed or damaged, otherwise, 4, some precision filter, can not be used repeatedly, such as bag filter, polypropylene filter, etc .; 5, found that the filter is deformed or damaged, the need to filter Replace immediately.
