Talking about the Quality and Safety Control Requirements of Children's Tent

The tents specially made for children are about the comfort and health of children, and manufacturers must pay full attention to product quality. When the inspection and quarantine department samples the children's tent products, it summarizes several problems that the manufacturer should pay attention to:

First, the limited requirements for eight heavy metal elements such as lead, cadmium, mercury, chromium, selenium, tellurium, arsenic and antimony in various printing inks of non-woven fabrics. Enterprise products need to obtain the third-party testing agency testing and certification to be qualified. It is well known that unqualified printing inks that exceed the standard will pose a health hazard to children. For example, lead is a neurotoxic substance and a brain cell killer. Excessive lead is easy to cause mental retardation in children and poses a great threat to the health of infants and children. Therefore, the fabric supplier is required to provide third-party testing agency inspection report and product conformity statement, so as to control the quality and safety of the product from the source.

Second, the tent must have ventilation requirements for the closure. In general, most children's tents are open, children do not have to worry about poor ventilation during breathing, but if they are closed or designed to be fully enclosed, then they should be in the tent. Sufficient vents are provided in the body or closure to ensure proper breathing safety for the child.

Third, the nonwoven fabric should have flame retardant properties, and the safety label and manufacturer's mark should be complete. The flammability requirements of non-woven fabrics in children's tents are the same as those of ordinary plush toy fabrics. Surface flickering should not occur when the flame is close to the flame. The safety labeling requirements of children's tents should not be neglected. Enterprises should explain the precautions of consumers during the installation and use according to the characteristics of the various children's tent products produced in the product or in the instruction manual. The manufacturer's mark indicates the manufacturer's name, address, contact information, etc., to facilitate product traceability.

The fourth is to ensure that the joints that form the structure of the child's tent are smooth and harmless. For the wire connection of the children's tent structure, if it is loose during use, it will form a tip, a burr, and protrude from the tent fabric, causing damage to children. To this end, the product interface has been riveted from only one rivet at the beginning. Up to now, three rivets are required for riveting. At the same time, a plastic sleeve is placed at the joint to ensure that the joint is firmly riveted and burrs are avoided to ensure the safety and effectiveness of the process.

Fifth, the non-woven fabric materials in the finished children's tents are not allowed to have residual needles. In the sewing process of the nonwoven fabric constituting the children's tent, the sewing needle and the scissors are the basic tools of the process. Although the tool is simple, it plays a decisive role in the production of the entire child tent, such as poor management, and finally produces it. Children's tents can easily cause accidental injuries to children. In order to eliminate this hidden danger, first of all, enterprises must control needles and sharps from the source, and develop appropriate needle and sharpware management procedures according to the actual situation of the enterprise, establish needles and sharps to lead, send and change records, and keep them in custody. Disbursement, the production site takes a fixed amount of needles as needed to ensure that the needle and sharps are under control throughout the production process.

At present, children's tent products are mostly used indoors. The non-woven fabrics used in tents do not have outdoor use requirements. If outdoor use is required, special fabrics must be purchased from suppliers that meet the relevant requirements. The fabrics must be waterproof and resistant. Radiation dual function to meet the needs of the outdoor environment.

Magnesium Sulfate

Magnesium Sulfate,Tomato Fertilizer ,Slow Release Fertilizer ,Plant Fertilizer

Compound Fertilizer Co., Ltd. , http://www.nbhumic.com