Air booster pumps are widely used in natural gas to enhance the pressure, the safety valve is more fixed, the regulator can be detected, pressurized oxygen, nitrogen, hydrogen, air, methane and other gases, valves and wellhead water Bubbling test. And in these areas, it has demonstrated a strong ability to work. Its use has also been greatly welcomed, the next will be for everyone air booster pump working principle analysis. Air booster pump works Air booster pump first work will be filled with liquid booster pump, and then start the centrifugal pump, the impeller rapid rotation, the impeller impeller driven liquid rotation, the rotation of the liquid to rely on inertia to the outer edge of the impeller flow, at the same time During this process, the liquid in the impeller flows around the flow vane, and the liquid acts a lift force on the vane in the flow around the flow. In turn, the vane acts on the force equal to and opposite to the lift force In the liquid, this force makes the work to the liquid, causes the liquid to obtain the energy to flow out the impeller, when the kinetic energy and the pressure energy of the liquid all increase. Air booster pump principle is the use of large-area piston low pressure piston to produce a small area of ​​high hydraulic. Air booster pump used in the original air pressure system to increase the pressure of the work environment, the working system can increase the air pressure 2-5 times, only need to work within the system as a compressed air source can be. This pump is suitable for single-source pressurization. No power (can be used in explosion-proof areas). In the pump pressure range, adjust the control valve to adjust the intake pressure, the corresponding output corresponding to the electrodeless adjustment. Air booster pump driving gas pressure range is mainly: 0.3 - 0.8MPa in this range, the maximum output flow of 1200NL / min, users should pay attention to these two parameters when using the device, because they will produce significant for the production influences. The effect of using the product is not good, not only depends on its working principle and working methods, more importantly, some information on the product needs to be further studied and understood.
